(English)
Tel: 86-18538591025
Email:sales1@leadcrete.com
Your position: Home > News > Product News
PC strand pusher machine used for 15.24mm and 16mm steel strand
date: 2021-10-25
PC strand pusher machine used for 15.24mm and 16mm steel strand
The pc strand pusher machine is the main tool used to drill steel strands for the tunnel during the construction of bridges and large buildings. 
The pc steel strand machine is driven by a motor to drive the double driving wheels, and the steel strand is inserted from the wire inlet of one end. The driving wheel and the double driven wheels press the steel strand to move forward along the catheter and enter the reserved channel until it passes from the other end of the channel. 

12.7mm pc strand
Out to reach the size for tension. Main features: This machine can be advanced and retracted. It integrates wire laying and threading into one. It is small in size, light in weight, easy to operate and easy to maintain. 
PC wire pusher machine
During construction, two people can complete the operation, greatly reducing labor intensity and improving production efficiency. Efficiency saves a lot of manpower, only need two people up and down, saving personnel management. Simple operation, accurate data without any waste, greatly saving material costs. Steel strands do not need to be cut and stored in advance to ensure material quality. Threading 180 meters per minute, two people can wear two spans of 32M high-speed railway box girder strands per day, low cost, efficient, fast and accurate. The device is light and easy to disassemble, install and transport. 
15.2mm pc strand pusher machine
Usage preparatory work before starting:
(1) Check whether the electrical wiring is correct and intact. Fill the gearbox with butter before use.
(2) Turn on the power and debug the forward and reverse. The equipment must be reliably connected to zero or grounded to prevent leakage from hurting people. 
(3) When used for the first time, according to the length of the lower line, the positioning ring of the outlet end of the wire barrel is welded to the wire barrel to be fixed, and it is stuck on the large opening of the anchor pad.
(4) Connect the lead cylinder to the host securely. 
(5) Hang the small head of the hook head rod into the grouting hole of the anchor pad, hang the long end into the hole of the wire barrel turnable ring, and insert the pin (you can make it with steel wire). 
(6) Attach the strong magnetic positioner to the anchor pad and insert the wire in the steel strand with the length of the blanking length.
The pc strand pusher machine steel hinge wire diameter ¢ 14- ¢ 16 Conveying distance 40--180 m.
 


Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country:
Email:*
Phone:
Inquiry:*