How about a small peristaltic pump for sale ?
1. Before disassembling the small peristaltic pump for sale , mark the left and right air chambers and liquid chambers respectively for subsequent reassembly.
2. Connect the outlet pipe with a wrench, loosen the small clamp with the liquid chamber, remove the outlet pipe to check the valve ball and valve seat, remove the valve ball and valve seat, check for wear on other parts of the pump To do. Chemical corrosion and cracks.  
Advantages of small peristaltic pump for sale :
1, convenient installation, easy operation, and continuous long-time operation.
2. The cutting sensitivity, abrasiveness, or gas-liquid solid mixture of various fibers and slurries sent to the pump is selected and the diameter of the material is 4-6 mm or more.
3. It can easily erode liquids in pumps, high viscosity, high density liquids and pasty liquids.
4. Replace seals, gaskets, impeller rotors, stators, or traditional pump internal components for hose pumps.
5. When the small peristaltic pump for sale moves clockwise and clockwise, there is no backflow and siphon phenomenon, it has the function of shutoff valve. When it reverses, the liquid can be pumped out and sucked back.
6. The pumped fluid is proportional to the rotation speed and can be measured accurately.
  Applicable conditions for small peristaltic pump for sale :
1. The small peristaltic pump for sale is a positive displacement pump, and the flow rate of the pump is determined by the output speed of the drive unit. Due to the structure and material of the pump, it is not easy to get too fast and the speed should be less than 50 rpm.
2. If the process is continuous operation, the actual flow rate should basically match the rated flow rate of the pump. If operation is required, you should choose a speed-adjustable pump to change the flow rate. Also, do not use the rated flow rate of the pump for a large flow rate.
3. If the process is a gap operation and there are no quantitative requirements, the rated flow rate of the pump can be higher than the actual flow rate required. If there are quantitative requirements, the rated flow rate of the pump should basically match the actual flow rate. If the actual flow rate of the pump is higher than the required flow rate, you can add a bypass pipe to adjust it.
4. Pump rated pressure refers to the working pressure of a small peristaltic pump for sale  equipped with a specific power motor. The actual working pressure of the pump is determined by the pipe resistance loss of the pump itself. Therefore, during operation, the actual working pressure of the pump must not exceed the rated pressure of a high flow peristaltic pump with a rubber hose.
5. Normal hose operating temperature is less than 100 ° C, taking into account the heat generated by moving parts during operation. Generally used for workers with material temperatures below 80 ° C. When the material temperature is allowed to reach 100 ° C under these conditions. For ventilation (or cooling), if the material temperature exceeds 100 ° C, a heat resistant hose should be selected.
6. Since the small peristaltic pump for sale is a type of pump, there is pulsation when carrying the material.
7. The small peristaltic pump for sale can operate idle for a short time.