Peristaltic pump mainly consists of pump house, rotor, roller, idle roller, peristaltic hose and driving unit. The peristaltic hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller's push, finally forms pressure conveying of slurry. Along with the cyclic squeezing of roller, the slurry is pumped continually.
 
Lead Equipment Co., Ltd. is a peristaltic hose pump manufacturer. Our pumping waste water used peristaltic pump are factory direct sale. And we have peristaltic pumps with different working pressure and output. The working pressure is from 10bar to 26bar, and the output is from 14m3/h to 54m3/h. If customers have any demands, we could provide customized service.
Take 20-25m3/h peristaltic pump for pumping waste water as example:
LCP20H-H peristaltic pump for pumping waste water:
LCP20H-H peristaltic hose pump is equipped with a hopper. It is designed on the basis of squeeze pump, and it can be used for pumping lightweight foam concrete, mortar and refractory materials. Hose pump working pressure is 25bar, its max output is 20m3/h, and its hopper capacity is 400L.
LH76-915B peristaltic hose pump for pumping waste water: 
LH76-915B peristaltic pump for pumping waste water can work as a bentonite slurry pump in tunnel boring machine. The working pressure of LH76-915B peristaltic hose pump is 1.0Mpa, its maximum output is 20m3/h, and its power unit are respectively 18.5Kw, 380V, 50Hz.
Peristaltic hose pump selection instructions:
1. When the process conditions for the intermittent production and no quantitative requirements, the peristaltic hose pump rated flow can be greater than the actual need for traffic.
2. When the process conditions for continuous production, the actual flow rate should be consistent with the peristaltic hose pump rated flow. If the required flow can be adjusted, you can choose with the frequency control hose pump.
3. The rated pressure of the peristaltic pump refers to the working pressure of the hose pump under the power motor. The actual working pressure of the peristaltic hose pump is determined by the loss of the hose pump's own system and pipeline resistance. Therefore, when designing, the actual working pressure in the system will be less than the rated pressure of the hose pump. If the actual working pressure is different from the rated pressure of the hose pump, the motor can be reconfigured.
Contact us for price: 
If you are interested in our peristaltic hose pump, we will recommend a suitable peristaltic hose pump for you. Please help us to confirm the following points:
1. What is the project with our peristaltic pump, is it for pumping concrete or others?
2. What is the pressure and output you require?
3. What is the local voltage you require? Is 380V, 50Hz OK for you?
4. What is Max aggregate size in the slurry?
You can send your requirements to our email, email address: sales1@leadcrete.com.