One power pack to drive four jacks at the same time
There are many types of hydraulic jacks, which are widely used in building construction, lifting roads and bridges, mining, slope tunnels, repairing mining machinery and other mechanical equipment. The weight that can be lifted can reach thousands of tons, but its own weight is only tens of kilograms. An adult can move it, and it can maintain a very stable lifting weight during use. It is because of its hydraulic structure that determines its existing functions.
Hydraulic jacks cannot be overloaded when in use. Once the rated stroke is reached, the operation should be stopped. If you are working with one power pack to drive four jacks at the same time, you need professional staff to direct the operation. In this way, it can be ensured that there is no deviation between the rise and fall of each point.
The hydraulic jack has a strong lifting force, so that some heavy objects can be lifted by it very well, it is very convenient to carry, and it is an important lifting tool in our daily work inspection and maintenance. Here we introduce one power pack to drive four jacks at the same time.
First of all, we must estimate the weight of heavy objects to ensure that the electro-hydraulic jack will not be overloaded during use. To operate the matching electric pump, first check the instruction manual, and strictly follow the operation steps of the instruction manual. Pay attention to the position of the oil inlet and oil return port. Do not reverse the connection. The connection part of the quick connector is screwed in place.
Secondly, because four hydraulic jacks are to be operated at the same time, when using a distribution valve to operate four jacks at the same time, the load should be evenly placed on the four hydraulic jacks, and the tonnage and stroke of each hydraulic jack should be consistent. If you find out of synchronization during the lifting process, you should stop working immediately, check the reasons, and see if you need to increase the lifting point to ensure the safety and reliability of the lifting process.
Finally, one oil pump to drive four jacks is well placed. Adjacent separate jacks must be separated by gaps. If possible, it is best to use wooden blocks to separate them to ensure the separation between the two sides. At the same time, we need to pay attention to the joint part, safety is the most important, so we must pay attention to see whether it is reliable.
If you have other question about synchronous double acting hydraulic jack, welcome to contact with us, we will reply you very sooner. Here we have a wealth of experience. Here is our official email: sales@leadcrete.com.