Mobile grout cement mixer in Thailand is used to mix cement and water evenly, then pour into grouting pump,in order to doing the grouting work efficiently. When working, water and cement according certain ratio is added into the grout-making tank, then, the materials work in the high speed continuous flow to be compounded equably under the action of the grout-making pump. The compounded grout is discharged into the store tank through the valve, in which there are two pieces of paddle can prevent from depositing and education. Mobile grout cement mixer in Thailand is combine with grouting pump, mixing cement and water, it can grout with pressure in mining, tunnel, culvert, subway, hydropower engineering, underground excavation engineering etc. Mobile grout cement mixer has high grout making speed, high efficiency, large volume, suitable for all kinds of grouting projects. It can be equipped with grout pump and used for tunnel excavation and maintenance, mining well engineering, dam construction, foundation treatment of big bridges and high building, and pressure grouting of all kinds of underground constructions. High mixing efficiency, motor directly driving impeller to get the high-speed liquid flow, about 1-2 minutes to complete a mixing; High reliability, vertical or horizontal-mounted electric motor, low failure rate and good seal; Adopt the ordinary rubber pipe as consumable part for control valve, easy to get it on construction site. Flexible and reliable mobile grout cement mixer in Thailand, it is quick and easy to move. The complete grout mixer and agitator system consists of a grouting platform which includes: mixer, and agitator. The platform design is simple, flexible and compact. Leadcrete serves a wide range of the capacity. Such as 100L, 200L, 300L, 500L, 800L, 1500L etc. Clients could choose the suitable according to your projects. LMA1500-1200E mobile grout cement mixer is a combination consist of a steel sheet cylindrical mixer tank heavy-duty slurry pump and agitator tank, set-up on a strong base frame. This product is equipped with an automatic control system that can automatically control the operation of the equipment. The slurry is mixed through a high speed vortex produced by a special pump which, after sucking the material from the bottom of the mixer tank, sends it back tangentially into the same tank in order to get highest possible efficiency. By this process it is possible to obtain homogeneous colloidal and high quality mixtures within a very short period of time.
After mixing, this mixtures are pumped into the agitator tank with slow speed mixing paddles by the above same pump. When all the mixture in the mixing tank is pumped out, press the discharge completion button to start the next cycle of pulping.