Leadcrete Equipment is engaged in the design, manufacture and export of grout mixer with agitator and hydraulic pump in 1 set and is committed to developing new products to meet customer needs to provide necessary technical support and engineering experience. Today, Leadcrete hydraulic grout pump with mixer has been widely used in China, Australia, Finland, Spain, Egypt, Lebanon, Mexico, Peru, Malaysia, the Philippines, Sri Lanka, etc., and have won customer satisfaction with high quality and competitive prices.
Use scenarios of grout mixer with agitator and hydraulic pump in 1 set:
1. Used for lining, anchoring and supporting grouting in tunnel and tunnel construction. In geotechnical engineering, it is suitable for medium and low pressure filling or crack grouting, penetration grouting, compaction grouting and split grouting.
2. In foundation engineering, it can be used for soft foundation reinforcement, foundation settlement and anti-seepage pressure grouting. In pile foundation engineering, it can be used for grouting mortar for jet grouting piles and mixing piles.
3. In the chemical industry, it is used to transport slurry raw materials and other media. In the metallurgy and steel sectors, it is used for the transportation and injection of refractory materials with good fluidity.
4. Equipped with air compressor and spray gun, this bentonite mixing device with piston pump can also be used for spraying and plastering of continuous walls. The vertical or horizontal transportation of plastering mortar and masonry mortar on the ground and wall of various brick-concrete block structures can be completed in the freezing project.
5. In water conservancy projects, it can be used for curtain grouting, consolidation grouting, backfill grouting of hydropower stations, reservoirs, and dams, and it can also be used for wall reinforcement.
Construction method of hydraulic grout pump with mixer:
1. Construction preparation: Use a pump to push the second lining repair table to the bentonite mixing device, and the position is stable;
2. Using m20 cement mortar as grouting material, the mixing of cement mortar must have good pouring properties. After consolidation, it has a certain degree of compression, tensile strength and good stability. The mixing of the mortar should be carried out in strict accordance with the mixing ratio specified by the laboratory.
3. After each grouting, the grouting pipe must be flushed with high-pressure water in time to ensure the next grouting is smooth.
The tunnel boring machine hydraulic grout plant has the following advantages:
1. Continuous output of small pulses, kicks or jumps
2. The grouting pressure and flow can be adjusted steplessly.
3. The high-speed vortex mixer ensures uniform and fast mixing.
4. The grouting agitator and the agitator switch adopt squeeze handles, which are easy to operate, safe and reliable.
5. The motor has an overload protection function,
6. The hydraulic system has oil temperature overheat protection.
7. Few spare parts ensure low maintenance cost of the machine.
Grout mixer with agitator and hydraulic pump in 1 set newly designed by our company. The hydraulic grout pump with mixers are located in the base. The hydraulic grout plants are mounted on a single skid (can be transported by pickup truck) for quick installation and immediate operation.
Use a piston pump to check the effect of hydraulic grout plant:
Analysis method: Analyze the grouting records, check whether the grouting pressure and grouting amount of each hole meet the design requirements; whether the leakage and running of grouting are serious during grouting, estimate the spreading range of the grout through the grouting amount, and analyze whether the design is consistent.
We are a professional manufacturer of grout mixer with agitator and hydraulic pump in 1 set. If you are looking for hydraulic grout pump with mixer, please contact us directly, email address: sales1@leadcrete.com