The foaming concrete machine for wall casting, also known as foam generator, is a kind of foam equipment that makes foaming agent reach a certain concentration of aqueous solution. The foaming agent itself cannot automatically become a foam, it must pass through the mechanical action of the foaming machine to become a foam. The foam concrete machine for wall casting is the ideal equipment for the production of lightweight foamed cement. It is the most advanced domestic new type of foaming equipment integrating hydraulic system, pneumatic system, quantitative conveying, and photoelectric control. The high-pressure transportation is fully automated, the construction operation is simple, and the performance is reliable.
When we use the foaming concrete machine for wall casting, we should remember the following things:
 1. It is used for the construction of the heat insulation layer in the underfloor heating project. The density can be adjusted arbitrarily according to user requirements. The strength can reach 0.6Mpa. The construction surface can be leveled naturally. After solidification, various ground materials can be directly pasted, which is necessary for underfloor heating construction. The most advanced equipment available.
2. It is used for roof heat preservation, and its heat preservation and heat insulation effect is 20-30 times that of ordinary materials. It can keep the temperature of the top floor room basically the same as the indoor temperature of other floors, warm in winter and cool in summer.
3. The foam cement machine for wall casting can also be used to produce various specifications of cement foam board, cement foam brick and external wall insulation materials, as well as for the insulation, moisture-proof, imitation and low temperature of various pipelines such as tap water pipelines, heating pipelines, and oil pipelines. The insulation of cold storage and cold wind storage can also be used to fill the internal voids of tunnels and mines. After a long time of work, the foaming concrete machine for wall casting will inevitably have some failures. One of the common faults is the chance of cement foaming caused by vibration.
Therefore, how to reduce the vibration of the foaming concrete machine for wall casting is a problem that needs attention. First, when using the cement foaming machine, lift the moving wheels to stabilize the feet, so that the cement foaming machine has as good stability as possible, so that the cement foaming machine will not vibrate due to instability. Secondly, when installing the cement foaming machine, try to use the pedal screw to fix the foaming cement equipment on the ground, and tighten the screw in time when it is loose. If it is a mobile foaming machine, a stable foot needs to be installed.