(English)
Tel: 86-18538591025
Email:sales1@leadcrete.com
Your position: Home > News > Product News
Foam concrete machine Malaysia
date: 2021-04-13
Foam concrete machine Malaysia is a new type of brick making machine widely used today. Compared with traditional cement bricks, foam bricks are lighter and more durable, and are also a new type of energy-saving insulation material.
 Foam concrete machine Malaysia
Foam concrete machine Malaysia can be used to produce various specifications of cement foam boards, cement foam bricks and external wall insulation materials. It can also be used for heat preservation, moisture-proof, waterproof and anticorrosion, heating and transportation pipelines, low-temperature cold room heat preservation and refrigeration sedimentation parts, and can also be used to fill tunnels and internal mines.
Operation process: First put the foaming agent in the foam generator, and then mix it with cement and water in the foam. Then, the mold is molded into a new material. 
The LF5 foam concrete machine Malaysia has a theoretical concrete output of up to 5 cubic meters per hour. The maximum horizontal suction distance is 300 m, the vertical suction distance is 40 m, and the mixing tank capacity is 200L. Compared with other cement foaming machines, it has a small footprint, high foaming efficiency and stable performance. 
In addition, we have also developed a new product: Concrete foaming machine LFC1000-H foam concrete machine Malaysia consists of mixer, mixer, foam generator, hose pump, screw feeder, belt conveyor and submersible pump. The equipment is equipped with a load cell and an automatic feeding system, which can define the weight of each dose and perform automatic feeding and complete mixing.
 Foam concrete machine Malaysia
The process is fully controlled by the automatic weighing system. After the preparation work is completed, press the automatic button to start automatic work. The mixer begins to mix. Sand, cement, water and foaming agent are sequentially loaded and mixed quickly after reaching the prescribed weight. After mixing uniformly, open the discharge door. The mixture flows to the bottom screen of the stirrer. The low-speed mixing blade is equipped with this agitator. After the mixture has completely flowed, close the door and continue mixing the next batch. At the same time, start the peristaltic pump to pump the foam concrete mixture to the work site.
Foam concrete machine Malaysia
This type of foaming machine is equipped with a water pumping system, and hose pumps are also one of our main products. LH series hose pumps are equipped with adjustable points, and users can conveniently and accurately adjust the hose gap by controlling the flow rate. In addition, the adjustable point is fixed on the peristaltic pump by screws, so it will not loosen during use.
The foam concrete machine Malaysia has the following structure:
1. Natural rubber outer layer
2. Nylon reinforcement layer
3. The lining material can be used for various chemical resistant rubbers
If you are interested in the Foam concrete machine Malaysia, please contact us! Email:sales@leadcrete.com


Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country:
Email:*
Phone:
Inquiry:*