The concrete foam making machine integrates feeding, foaming and mixing and is miniaturized. It is currently the only ultra-light integrated foaming machine in China. The foaming mechanism adopts the most advanced high-pressure air foaming technology and uses air jets for secondary heating The bubble principle, simple and compact structure, is a small and efficient foaming device. It is small in size and weighs about 910kg. It can be easily moved by six people on site. It is easy to use. It generates bubbles when starting up. It has low failure rate and light weight.
The power of the concrete foam making machine is to use compressed air, the time is short, the foam is an independent network foam, the foam is rich, delicate and large, and the capacity can reach 200​​L.
The power can be adjusted according to customer requirements, reduce noise, reduce the amount of foaming agent, and reduce power consumption. The foam is as fine as cheese, and all kinds of foaming agents at home and abroad can be used.
Foam making machine for sale is widely used in: foam concrete cutting parts, lightweight wall spaces, fire door cores, magnesium oxychloride and glass magnesium foamed cement production lines and other environmentally friendly composite air duct foaming auxiliary equipment, with the characteristics of large consumption. 
Features of foam making machine for sale:
1. Double full hydraulic drive system to ensure high output pressure of high-rise buildings.
2. The proportion of each component is automatically controlled, and the density of foamed cement is easy to adjust.
3. High-quality wear-resistant parts, long service life, and after-sales service guarantee. Equipped with walking wheels, it can be moved on the ground or installed on a truck.
4. The air-cooled system does not rely on external water.
5. Foam making machine for sale is equipped with a wired remote control, easy to operate.
6. It can be used as cement foaming machine and mortar pump.
Advantages of concrete foam making machine for sale produced by this machine:
1. Foam cement insulation board has excellent sound insulation ability.
2. High thermal insulation rating. The indoor temperature can be kept within a proper range and the cost of air conditioning can be reduced by 30%.
3. Earthquake resistance.
The impact of the earthquake on the building is proportional to the weight of the building, so the foam cement insulation board shows excellent seismic performance. It is used exclusively in high-earthquake areas like Japan.
4. Save floor space.
Using thinner blocks (6" instead of 9" exterior walls) can increase the footprint by 3-5% due to its excellent waterproof and insulating properties.
5. Cost savings.
Lightweight foamed cement greatly reduces the self-weight of the building, thereby reducing the structural cost of steel (up to 27%) and cement (up to 20%). The size of the foamed cement wall is 8 times that of clay bricks, and only 1/3 of the joints are needed, so the overall mortar saving is as high as 66%.
Its automatic manufacturing process enables the foamed cement to have excellent dimensional accuracy and a smooth surface, without the need for a three-layer plaster wall, and allows the final 6 mm degreasing coating (putty/POP).
6. Fire protection
The best-in-class fire rating is 4 hours. The melting point of the foamed cement board exceeds 1600 ºC, which is more than twice the typical temperature of a building fire (approximately 650 ºC).
7. Water barrier
Its structure does not allow capillary action, making it impermeable. By adding cone-based additives, its waterproof performance is further enhanced.
8. High strength
High-pressure steam curing gives the foamed cement board incredible strength.
Application of concrete foam:
1. Floor/roof casting.
2. Block making.
3. Wall panels.
4. Frame wall and house structure casting.
5. Backfilling of subways and coal mines.
If you want to know more about concrete foam making machine for sale or our different foam concrete making machines, please email us.