Colloidal grout plant is a complete set of equipment that combines a grout mixer and agitator, a grouting pump to reduce complex procedures and perform high-efficiency and low-consumption work. Colloidal grout plant is mainly used for the construction of roads, railways, hydropower, construction, mines and other above-ground and underground projects. It can quickly mix water, cement, sand, bentonite, filler, clay, silicate and other media. Then grouting can achieve the functions of waterproofing and plugging, tunnel lining, reinforcement of foundations and rock formations, and filling of voids.
Advantages of colloidal grout plant:
1. Compact structure, integrating a slurry machine, agitator and a grouting pump;
2. Possess low pressure, high pressure and stepless speed regulation system;
3. Adopt extrusion valve to realize the function switching between the mixer and the pulping machine;
4. The oil thermometer can automatically control the cooling fan to work within the normal temperature range. If the temperature is too high, the machine will automatically stop working
5. Fully hydraulic drive, electric motor or diesel engine as power source;
Operation and maintenance are relatively simple.
In order to ensure the normal operation of the colloidal grout plant during use, reduce the failure rate, improve work efficiency, and reduce maintenance costs. When using the colloidal grout plant, it should be maintained regularly, carefully maintained, and scientifically maintained to increase the life of the grouting pump.
Based on the principle of prevention, it is imperative to fail without maintenance, and it will be too late when there is a failure.
1. After use, clean up the grouting pump pipeline to prevent residual cement slurry from solidifying and causing blockage;
2. Brush lubricating oil on the lubricated parts to prevent rust; replace the lubricating oil in the box after long-term use, and do a good job of preventing rust and moisture;
3. Regularly check the key components of the colloidal grout plant, and tighten the screws if they are loose.

As a colloidal grout plant manufacturer, we have colloidal grout plant with different tank sizes, pump output, working pressures and powers. Such as: the mixer volume is from 100L to 1200L, the agitator volume is from 150L to 3000L, and the output is from 50L/min to 300L /min. We could provide customized services for customers according to their requirements.

Besides the colloidal grout plants, we also produce others grouting and pumping equipment. Such as: grout mixer and agitator (electric motor or diesel engine for option), grout pump (hand operate, electric motor, electric hydraulic, diesel engine motor, diesel hydraulic, and air powered). We could provide customized services for customers according to their requirements.

Contact us for colloidal grout plant for sale details:
We are a colloidal grout plant supplier. If you are interested in our colloidal grout plant, we will recommend a suitable one for you. Please help us to confirm the following points:
1. What kind of grouting project would you use the grout equipment?
2. What is the pressure and flow rate do you need?
3. How about the water and cement ratio, does any sand in?