Foamed concrete is a new type of fireproof, thermal insulation and energy-saving material. It is mainly made of special cement and fly ash as the main raw materials, adding foaming agents, special fibers and other composite, mixing, and foaming moldings. CLC foaming concrete machines are used in this work. To be done. Foamed concrete foamed cement board has good thermal insulation performance, belongs to A-grade non-combustible thermal insulation material, is light-weight, shock-resistant, reduces basic load-bearing, strong compressive strength, strong adhesion, non-toxic, harmless, environmentally friendly and energy-saving. The CLC foaming concrete machine is a generous and lightweight soil production equipment that integrates a foaming system, a mixing system, and a pumping system. It is our company's large amount of foam concrete filling, which requires fast equipment construction, high construction efficiency, and stable performance. The special equipment for foaming cement filling is carefully designed to meet the construction requirements. This equipment successfully overcomes the technical problems of the traditional foaming cement machine used in filling projects, the construction speed is slow, and the construction is more convenient and quick, the operation is simpler, and the product quality is more standard. The main features of the CLC foaming concrete machine:
1. High foaming rate, uniform and stable foam, easy to accumulate.
2. The main pump discharges the slurry evenly and stably, and the quality of the foamed concrete is reliable.
3. Small size, light weight, flexible on-site movement.
4. Mechanical drive, no hydraulic system, simple operation and low cost.
5. With the continuous feeding system, it can meet the needs of large-area, multi-level rapid construction.
CLC foaming concrete machine is a lot of things that need to be paid attention to when using it. Let's take a look at the relevant knowledge in detail: 1. Pay attention to cooling down
Working for a long time can easily cause the machine to heat up too high, so pay attention to cooling down in time. When the motor is overheated, the door of the foaming machine can be opened to allow it to ventilate naturally. Or use an electric fan or a blower to cool the motor.
2. Minimize the vibration of the foaming machine
When the power unit of the cement foaming machine is working, it will produce certain vibration. This vibration will have a destructive effect on the foam that has already formed. And cause damage to the instrument installed on the machine. Therefore, when installing the foaming machine, try to use anchor screws to fix the foaming machine on the ground. When the screws are loose, they must be tightened in time.
3. Water leakage treatment of cement foaming machine
Water leakage in the foaming machine is generally caused by the foaming agent inlet pipe or valve. Check whether the inlet pipe is broken, whether the joint is loose or not tightened. You can also check whether the valve is loose or damaged. If the valve is damaged, replace it immediately.
4. Treatment of air leakage from cement foaming machine
Long-term use of high-pressure air rafts causes air leakage; long-term use of tracheal joints has been damaged and air leakage; solenoid valve or other parts production failures cause air leakage; bubble-making device is not tightly sealed or seal failure causes air leakage. The cause of air leakage is nothing more than the above four.