Cellular lightweight concrete machine is divided into mechanical cement foaming machine and hydraulic piston cement foaming machine according to the principle. Mechanical cement foaming machines have low conveying efficiency and many failures, and are gradually replaced by hydraulic cement foaming machines.
The cellular lightweight concrete machine consists of a cement feeder, a cement mixer and a foam concrete pumping machine.

The cellular lightweight concrete machine is designed as an integral foaming device and cement mixer, which automatically sucks the cement slurry processed by the mixer, pressurizes it by the pump, sends it to the mixer, mixes with the foam sent by the foam generator to form foam, and then passes the concrete slurry through pipeline to the construction site.

(1) Cement feeder
The cement feeder is a cement feeding equipment for foamed concrete, which meets the performance requirements of continuous operation, uniform feeding, controllability, and energy measurement. At present, there are mainly three types of cement feeders for preparing foamed concrete on the market. One is a conveyor belt feeder, the other is a screw auger feeder, and the third is a sliding bucket feeder. Three types of feeders are suitable for different types. Use occasions. The conveyor belt feeder is mainly suitable for fixed operations; the slide rail type feeder is more suitable for fixed metering equipment; the screw auger feeder is suitable for mobile continuous metering equipment and also suitable for large combined units. The biggest advantage is that it is sealed without dust, high efficiency, can be measured, and the conveying angle is large, which is very suitable for outdoor continuous operation.
(2) Cement mixer
The cement mixer should be able to produce good cement slurry. The conditions for pulping are: water and cement are fully stirred in a limited space in the shortest time without particles agglomerated. The conditions are: high speed, high crushing rate, no external splashing device, especially suitable for the processing of fast-setting materials.
(3) Foam cellular lightweight concrete machine
Foam cellular lightweight concrete machine is a special pumping machine for conveying foam concrete slurry. It is required that the output is adjustable during construction, the pressure pulse is small, the stability is good, and the failure rate is low. In recent years, there have been many types of pumping units used in the market, such as screw pumps, hydraulic plunger pumps, diaphragm pumps, hose pumps, pressure tank pumps and so on. The most popular application on the market is hydraulic plunger sets, followed by hose pumps. Due to the high crushing rate and fast wear of screw pumps, diaphragm pumps have been gradually eliminated. Diaphragm pump has low pumping pressure, and the vertical conveying is less than 60m. But because its delivery quality is better than other pumps, it is suitable for some occasions where the height is not high. At the same time, its service life is the longest of all types of pumps. Pressure tank pumps are gradually eliminated due to less application and backward applications. There are many hydraulic plunger pumps and hose pumps used in the market.
Features of cellular lightweight concrete machine:
1). The cellular lightweight concrete machine has wheels, the production line is easy to move, and it can be used in many places, such as construction
plants, massive plants, etc.
2). Light weight, the host is only 600kg, and it can also be equipped with a forklift, which saves time, effort, and low cost
Power consumption, about 15kw across the line.
3). Pump cement foam
Plant-based foaming agents, animal-based foaming agents, and synthetic foaming agents can be used.
You can adjust the volume of raw materials.
Application of cellular lightweight concrete machine:
1. Cellular lightweight concrete machine for floor/roof casting.
2. Cellular lightweight concrete machine for blockage.
3. Cellular lightweight concrete machine for wall panel.
4. Cellular lightweight concrete machine for frame wall and house structure casting.
5. Cellular lightweight concrete machine for backfilling of subways and coal mines.

Our cellular lightweight concrete machine factory is a leading manufacturer in the engineering machinery industry. We have a professional design, development, sales and after-sales team. We have nearly ten years of experience in cooperation with customers, providing professional design and practical solutions for a wide range of process requirements. The products are exported to more than 60 countries including the United States, Canada, the Czech Republic, Spain, France, Hungary, Nigeria, Seychelles, India, Malaysia, and Thailand.