250kg capacity refractory pan mixer for sale
250kg capacity refractory pan mixer is a type of forced mixer. On the basis of the traditional refractory pan mixer, Lead Equipment Co., Ltd. has developed a new refractory pan mixer after years of practical experience. The 250kg capacity refractory pan mixer has the characteristics of higher transmission efficiency, stronger structure, longer service life and lower failure rate. 
   
This 250kg refractory pan mixer is widely used in the mixing and mixing of wet and dry materials such as steel mills, refractory materials plants, and new building materials plants. The working principle of the 250kg capacity refractory pan mixer is that by pressing the start button of the power distribution cabinet, the castable mixer is connected to the power supply, and the motor drives the mixing arm to make a circular motion through the cycloid reducer. After the operation is normal, add the materials to the mixing drum, and under the stirring of the mixing shovel, make the materials tumbling up and down, left and right, so as to achieve the purpose of uniform mixing and mixing. The 250kg capacity refractory pan mixer is safe and easy to operate in use, avoiding operation accidents.
 
The 250kg capacity refractory pan mixer can mix plastic concrete, mortar, slag, paint, castable, silicate products, etc. The250kg refractory pan mixer has large mixing capacity, uniform mixing, fast speed, fast and clean discharge, convenient use and simple maintenance and other characteristics, and equipped with a current protector, will not damage the motor.
It is worth paying special attention to:
1. Be sure to cut off the power supply during the process of replacing the scraper, and hang up a sign prohibiting starting. It is best if someone guards the power supply.
2. The staff should regularly change the oil for the reducer and fill the motor bearings with grease. To extend the service life of the machine.
     
250kg refractory pan mixer operating instructions:
1. Preparation before starting: check whether there is any debris in the mixing drum, check whether the bolts in each part are loose or missing, whether the reducer oil is sufficient, check whether the scraper is loose, the angle is correct, the power supply and the wire leakage, etc.
2. Power on: Clear all materials in the disk, ensure that it is emptied and then power on. Start the machine, listen to whether there is any abnormal sound, and add materials in strict accordance with the regulations
3. Shutdown: stop the machine after the material in the pan is finished, clean the remaining material in the pan, the 250kg refractory pan mixer is equipped with remote control command or manual operation, it is safe to use, convenient and easy to operate
If you are looking for direct supply of  refractory machinery from the factory supplier and need to be customized. please contact me.