squeeze hose

The working principle of the Squeeze hose peristaltic pump is based on the alternate expansion and contraction of the elastic squeeze hose to transport substances, and its operation is as simple as our throat and esophagus. The squeeze hose with smooth inner wall and reliable strength is installed inside the pump body, and is rotated and squeezed by two protrusions on the turntable. This kind of rotation makes the medium transport in one direction without backflow, which can make the pump applied to the occasion of precise metering, and the pressure can reach 16Bar / 230psi. The shape recovery of the squeeze hose after conveying the medium can generate a full vacuum in the pipe to suck the medium into the pipe, so the use of the squeeze hose peristaltic pump can convey extremely viscous media without problems. Fill the lower part of the pump body with a specially designed lubricating oil grade to lubricate the squeeze hose and reduce the temperature so that the squeeze hose has a longer service life. Since the medium only contacts the squeeze hose for peristaltic pump and does not contact any other parts, the squeeze hose peristaltic pump is very suitable for conveying abrasive and high-viscosity media.

Squeeze hose for concrete pump application:
The extruded tubes for extruded pumps produced by our company are widely used in pump body accessories for construction, highways, tunnels, bridges, water conservancies, mines, lines, and other construction projects.

Squeeze hose for foam concrete pump is a tube specially made for foam concrete pump, which satisfies abundant shape recovery and wear resistance. Squeeze hose is mainly divided into a high-elastic and wear-resistant outer layer, an anti-compression interlaced middle layer and a strong and lubricating inner layer. The material is excellent, the processing is fine, and the process is special. Different materials can be adjusted to manufacture pipes for different applications.
Hose for foam concrete pump features:
1. Uniform toughness makes the force more uniform;
2. Special anti-aging formula;
3. Strong shape recovery makes the suction stronger;
4. Internal pressure resistance up to 3MPa;
5. The fine processing size extends the service time;
6. Uniquely suitable for pumping viscous fibers and particles.

Squeeze pump hose is also called rubber squeeze tube, squeeze tube, and surround squeeze tube.25 bar wp squeeze pump hose operating principle is:
The rubber hose is flattened by the shaft wheel of the pump and then loosened, so that the rubber hose returns to its original shape by its own elasticity, so that a vacuum is generated in the pipe to suck the mortar in the storage tank, and then the mortar is pushed forward under the extrusion of the shaft wheel.

Trelleborg squeeze hose for concrete pump consists mainly of pump house, rotor, roller, idle roller, squeeze hose and driving unit.