Squeeze hose for foam concrete

Peristaltic pump hoses are a type of peristaltic hose that is used specifically in peristaltic pumps. These pumps work by squeezing the hose between a rotating compression shoe and a fixed surface, creating a vacuum that draws the fluid into the hose, and then forcing the fluid downstream by the action of the compression shoe.

EPDM rubber squeeze hose tube can be applied to ketone, alcohol and concentrated acid. Hose is soft, strongly resilient, superiorly abrasion resistant, and very good positive and negative pressure resistance. We provide Squeeze hose tube OEM and ODM service. Quality is our culture, and our mission is to make communication stronger. Hope we can be one of your suppliers in China.

The squeeze pump hose for the extruding pump produced by our company is widely used in the pump body accessories for the construction of highways, tunnels, bridges, water conservancy, mine lines, and other construction projects, and also can be used for spraying large areas of wall bottom layer and various types of the cover layer, after the pressure grouting, mortar transport foundation construction pressure grouting, in the GRC industry to make glass fiber reinforced cement products to make large and medium-sized precast concrete components in the petrochemical metallurgy industry used in blast furnace inner wall spray perfect fire material.

We can provide you with Trelleborg squeeze hose, peristaltic pump high-pressure grouting squeeze hose, high wear-resistant squeeze tube clamp cloth hose, and other squeeze hoses.

Squeeze hose for concrete pump application:
The extruded tubes for extruded pumps produced by our company are widely used in pump body accessories for construction, highways, tunnels, bridges, water conservancies, mines, lines, and other construction projects.

Squeeze hose pumps, also known as peristaltic pumps or hose pumps, are commonly used for pumping concrete and other materials in the construction industry. These pumps work by squeezing a flexible hose or tube with a set of rollers, trapping the material and pushing it through the hose. The main advantage of using a squeeze hose pump is that it has no valves, which eliminates the need for seals and makes it highly resistant to abrasion and corrosion.

Peristaltic pump rubber hoses, also known as squeeze pump hoses, are a type of rubber hose used in peristaltic pumps. Peristaltic pumps work by compressing the rubber hose with a series of rotating rollers or rollers shoes, pushing the fluid through the hose and creating a vacuum in the process.

Squeeze hose pipe consists primarily of an inner rubber layer, middle rubber layer, 2, 4, or 6 layers of steel wire reinforcement, and an outer rubber layer. The inner rubber layer has the function of maintaining the conveyed medium under pressure and protecting the steel wire from corrosion. The outer layer protects the steel wire from damage, while the layer(s) of steel wire (φ0.3-2.0 reinforcing wire) serves as the strengthening effect of the skeleton material.

High-pressure steel wire concrete hose pipe is mainly composed of inner rubber layer, middle rubber layer, 2, 4, 6 layers of steel wire wound reinforcement layer and outer rubber layer. The inner rubber layer has the function of maintaining the pressure of the conveying medium and protecting the steel wire from erosion. The outer layer protects the steel wire from damage, and the steel wire layer (φ0.3–2.0 reinforced wire) layer is the reinforcement of the skeleton material.

Chemical resistance peristaltic pump hoses are specifically designed to resist the corrosive effects of various chemicals, acids, and alkalis. These hoses are made of materials that can withstand aggressive chemicals and maintain their structural integrity without breaking down or degrading over time. The most common materials used in these hoses are natural and synthetic rubbers, such as EPDM and silicone. EPDM is known for its excellent resistance to acids and alkalis, while silicone has excellent resistance to high temperatures and low-pressure applications.

Squeeze concrete pump hose, also known as squeeze hose, peristaltic pump hose, or tubing, is a type of soft hose that is commonly used in the construction industry for pumping concrete, mortar, and other high-viscosity liquids. It is made up of an elastomeric tube that is squeezed by a set of rotating rollers or fingers attached to a rotor or a cam. This squeezing action moves the liquid through the hose and releases it at the other end.

Squeeze pump hose is also called rubber squeeze tube, squeeze tube, and surround squeeze tube.25 bar wp squeeze pump hose operating principle is:
The rubber hose is flattened by the shaft wheel of the pump and then loosened, so that the rubber hose returns to its original shape by its own elasticity, so that a vacuum is generated in the pipe to suck the mortar in the storage tank, and then the mortar is pushed forward under the extrusion of the shaft wheel.

Trelleborg squeeze hose for sale has an inner rubber layer (the material of the inner rubber layer is determined by the use of the hose), the multi-layer cloth or the cord are used as the reinforcing layer, and the outer rubber layer is determined according to the use of the hose.

peristaltic hoses can be used in a wide range of sizes and can be customized according to your needs. It is used in hose pumps to pump water, mortar, cement, concrete, bentonite, foamed concrete, pigment, sewage, etc

The squeeze hose for a grout pump is a consumable part applied to industrial peristaltic pumps, widely used to transfer and convey mortar, concrete, or foamed concrete. The part is manufactured in polyurethane, which is characterized by reliability, super quality, elasticity, and long duration. The inner rubber layer of different materials is used inside the hose, and the multi-layer cloth or cord is used as the reinforcement layer. The outer rubber layer depends on the purpose of the hose and has good anti-friction performance.

Squeeze hose manufacturers provide peristaltic pump squeeze hose product structure, peristaltic pump squeeze hose application fields, and peristaltic pump squeeze hose use precautions and other related information.
The product structure of the squeeze hose: the inner rubber is natural high wear-resistant rubber, the middle is high elastic nylon thread, and the outer layer is high wear-resistant and anti-aging rubber.

High-pressure steel wire hoses for transferring slurry are mainly used in hydraulic supports, oil field drilling, and mines, and are suitable for engineering construction, lifting, transportation, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and mechanization and automation of various industrial sectors. The hydraulic system has a certain pressure (high pressure) and oil (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, water) and hydraulic transmission, etc. The highest working pressure can reach 70-100 MPa.

Squeeze hose for sale is a pump tube in the compression hose pump, also known as compression wear-resistant hose, special hose, peristaltic pump tube, etc. It is composed of a variety of materials, such as rubber, polyurethane, polyamide, etc., and can be used to transport various chemicals, food, sewage, and liquids containing solid particles. Because its channel is squeezed through the compressed hose to convey the fluid, it has no dynamic seals, so it has the advantages of no leakage, easy cleaning, and high reliability. It is currently widely used in pharmaceutical, food, environmental protection, chemical and other fields.

Selecting the correct Trelleborg squeeze hose type and material is the most critical aspect of the correct application of a peristaltic pump. The Trelleborg squeeze hose must be of the correct material for the fit to avoid premature wear on the squeeze which could cause the hose to leak, normally the hose can be replaced when it wears out.
Trelleborg squeeze hose structure and features: the inner lining and outer lining of the hose are made of high extrusion-resistant composite rubber, and the structure is wound with one or more layers of high-strength synthetic fibers according to different customer pressure and outer diameter requirements. The tube body is soft, with strong elasticity, wear resistance and pressure resistance. Trelleborg squeeze hose has good cycle recovery performance, long service life and durability during use.

A concrete hose pipe with an inner diameter of 75 mm and an outer diameter of 120 mm is a relatively large hose pipe that is designed specifically for handling concrete in construction sites. The larger diameter of the hose allows for the efficient transportation of the viscous and heavy concrete mixture.
The hose is typically made of reinforced rubber or other durable materials to withstand the abrasion and wear that comes with the transportation of concrete. The hose is connected to the concrete pump and run along the construction site to deliver the concrete mixture to the desired location.

Squeeze pipe for concrete pump is mainly composed of an inner rubber layer, middle rubber layer, 2, 4, and 6 layers of steel wire winding reinforcement layer, and outer rubber layer. The inner rubber layer has the function of maintaining the pressure of the conveying medium and protecting the steel wire from erosion. The outer layer protects the steel wire from damage, and the steel wire layer (φ0.3–2.0 reinforced wire) layer is the reinforcement of the skeleton material.

The squeeze concrete pump hose is a high-performance pipe made from compounded rubbers and reinforced with synthetic fibers. The addition of these fibers enhances the overall performance of the pipe body, making it more durable and resistant to both positive and negative pressure, acid, alkali, and high temperatures. Thanks to its unique design, squeeze concrete pump hose can transport more than 90% of today’s chemicals while generating low heat, exhibiting good recovery, and being durable.

Squeeze pipes for concrete pump are a crucial component of concrete pumping equipment. These pipes are made of high-quality rubber and reinforced with high-strength synthetic cords, canvases, and steel wire. They are designed to perform under high temperatures and various levels of pressure, making them suitable for high-performance pumping applications.
One of the distinguishing features of squeeze pipes for concrete pump is their ability to withstand a wide range of pressures and temperatures, making them ideal for use in a variety of construction projects. Due to the high-quality materials used in their construction, squeeze pipes can endure wear and tear caused by abrasive and corrosive materials, ensuring long-lasting performance.

Known for their durability and quality, Trelleborg squeeze hoses for concrete pumps are suitable for a wide variety of pumping applications including the pumping of abrasive materials, slurries, and concrete. Trelleborg’s concrete pump hoses are designed to handle high-pressure and high-volume pumping and they come in a variety of sizes to fit different pump models. The hose is constructed of a durable rubber material that resists abrasion from abrasive materials and other environmental elements.

The working principle of the Squeeze hose peristaltic pump is based on the alternate expansion and contraction of the elastic squeeze hose to transport substances, and its operation is as simple as our throat and esophagus. The squeeze hose with smooth inner wall and reliable strength is installed inside the pump body, and is rotated and squeezed by two protrusions on the turntable. This kind of rotation makes the medium transport in one direction without backflow, which can make the pump applied to the occasion of precise metering, and the pressure can reach 16Bar / 230psi. The shape recovery of the squeeze hose after conveying the medium can generate a full vacuum in the pipe to suck the medium into the pipe, so the use of the squeeze hose peristaltic pump can convey extremely viscous media without problems. Fill the lower part of the pump body with a specially designed lubricating oil grade to lubricate the squeeze hose and reduce the temperature so that the squeeze hose has a longer service life. Since the medium only contacts the squeeze hose for peristaltic pump and does not contact any other parts, the squeeze hose peristaltic pump is very suitable for conveying abrasive and high-viscosity media.

Squeeze hose for foam concrete pump is a tube specially made for foam concrete pump, which satisfies abundant shape recovery and wear resistance. Squeeze hose is mainly divided into a high-elastic and wear-resistant outer layer, an anti-compression interlaced middle layer and a strong and lubricating inner layer. The material is excellent, the processing is fine, and the process is special. Different materials can be adjusted to manufacture pipes for different applications.
Hose for foam concrete pump features:
1. Uniform toughness makes the force more uniform;
2. Special anti-aging formula;
3. Strong shape recovery makes the suction stronger;
4. Internal pressure resistance up to 3MPa;
5. The fine processing size extends the service time;
6. Uniquely suitable for pumping viscous fibers and particles.

Trelleborg’s compression hose consists mainly of three important parts: the hose itself, the flange, and the fixture. The compression hose produced by Trelleborg has good wear resistance, corrosion resistance, and high-pressure resistance, and Trelleborg squeeze hose is suitable for medium transportation in various industrial fields.
At the same time, Trelleborg also provides customized compression hose products to meet the special needs of different customers. If you have more specific questions, I can help you with a more detailed understanding.

The squeeze hose for foam concrete is mainly used across various industries, including gold smelting, chemical, petroleum, water treatment, mining, construction, and others. Our company’s hose body is made with the addition of synthetic fibers which makes it soft, elastic, and wear-resistant. This particular hose is widely used in mechanical production and its performance parameters are exceptionally high. Moreover, this hose has low thermal elasticity, superior recovery during use, and high durability. Additionally, it has excellent features such as resistance to positive and negative pressure, acid, alkali, oil, and high temperature. Overall, the squeeze hose for foam concrete exhibits superior comprehensive performance.

Our natural rubber squeeze pump hoses are highly sought after due to their exceptional longevity and application versatility. The hose structure consists of one or more layers of high-strength synthetic fiber braided material, with the inner lining and outer lining extruded from composite rubber. This ensures a soft, elastic tube body with excellent performance. Synthetic fibers are added to the tube body, enhancing overall hose performance. Additionally, our hoses generate low heat during use and exhibit excellent elasticity and recovery properties.

It is also important to consider the power supply of the hose pump. Depending on the size and scope of your project, you may need to use an electric or hydraulic hose pump. Electric hose pumps are smaller, more compact and easier to control, making them ideal for small or indoor projects. Hydraulic hose pumps are larger and more powerful, capable of handling larger volumes of bentonite slurries and harsher outdoor conditions.