Sound and thermal insulation clc foam block making machines

The lightweight concrete block making machine for sale foaming system and the foam and the cement slurry are evenly mixed, and then the pumping system of the foaming machine is used for in-situ construction or mold molding. A new type of lightweight thermal insulation material containing a large number of closed pores formed by curing.

The high durability foam concrete blocks making machine mainly includes a mixer, a foam generator and a pump. And the pump may be the most important part for a CLC machine. There are mainly three types of foam concrete pump in market now, they are screw pump, hose pump and double cylinder piston pump. Screw pump is usually used for small capacity CLC machine, and suitable for roof insulation and floor heating.

CLC lightweight concrete machine for roof insulation is widely used to pump foam concrete, and this high-quality foam concrete perist is becoming increasingly popular around the world.

china supplier for foam concrete machine is compact and equipped with electric motors. This makes our pumps more powerful than other products on the market. Once installed, it can pump concrete evenly, regardless of distance or pump height.

We can supply different models of concrete blocks or products making unit depend on the different capacity and application. Our concrete blocks or products making unit is high automatic and can improve your production efficiency greatly.

Foam concrete block making machine for clc foam concrete is a new type of fire-proof and heat-insulating energy-saving material. It uses special cement and fly ash as raw materials, adds foaming agents, fibers, etc. and stirs it to foam. The advantages of heat insulation, and the characteristics of light weight, compressive strength, environmental protection and energy saving.

The light weight cellular concrete making machine are used for building cottages, wall insulation in multistory buildings and internal partitions. Also CLC can be produced and poured for floors and roofs on-site. In roofs it can be used because of very good insulating and lightweight.

The cellular lightweight foam concrete block machine for sale also applied for insulation, moisture proofing, anticorrosion of water, heating and transmission oil pipeline, insulation of low temperature cold store and refrigerated depot section, can also be used in filling tunnel and mine internal voids etc.

Foam brick block machines is popular all over the world, because there is a new type building material – foam concrete is widely used in many countries, such as, Russia, Italy, Turkey, German, Malaysia,etc. And our products has been exported to many countries, including Russia, India, South Africa, Philippines, etc., has good fame and brand in the world.

The best price lightweight foamed concrete machine  is a kind of machine that produces and produces foam. This kind of machine produces foam from a certain concentration of foaming agent in an aqueous solution. It is the most common and simplest equipment for producing foaming agents.

ClC Plant Lightweight block Foamed Concrete Machine produce fine, cotton-like foams. It is easy to make a large foam for a cement foaming machine, but a certain technique is required to make a fine foam. Therefore, the small size of the foam is also a manifestation of the good performance of the cement foaming machine.

The continuous clc foam concrete block machine is a kind of foam equipment that makes foaming agent reach a certain concentration of aqueous solution. The foaming agent itself cannot automatically become a foam, it must be formed by the mechanical action of the CLC block making mixer machine.

ce certification foam concrete mixer machine is the lightweight foam concrete machine which has a strong function for house building, meanwhile, it matched with LD30 foam concrete pump . The ce certification foam concrete mixer machine can do the perfect service for making walls.

The easy operation concrete foam machine also called cement foam concrete unit or cement foam concrete machine, because it is made up by foam concrete mixer and foam concrete pump, wide used for foam concrete project, such as making blocks cast-in-situ, roof insulation and filling voids, the raw material is cement, sand, fly ash and so on.

The high efficiency lightweight concrete machine is an air bleeder. Its essence is to introduce air into the aqueous solution of the foaming agent to evenly disperse it, so as to achieve the largest possible contact interface between liquid and gas, so that the surface active substances in the foaming agent form on the surface of the liquid film The two-electron layer surrounds the air and forms bubbles.

The foam concrete cement foaming machine for floor roof wall cast in place is used for roof heat preservation, and its heat preservation and heat insulation effect is 20-30 times that of ordinary materials. The foam concrete cement foaming machine can keep the temperature of the top floor room basically the same as the indoor temperature of other floors, warm in winter and cool in summer.

foam concrete block making machine for tunnel lining filling is a device that can make foaming agent a certain concentration of an aqueous solution into foams. The foaming agent itself does not automatically become foams, it must pass the mechanical action of the foam concrete machine to become foams.

The lightweight foam concrete block making machine includes a screw conveyor, a mixer, a foam generator and a foam concrete pump, adopts advanced control technology, can exactly adjust foam cement density. It also meets different densities of foam concrete products manufacturing.

High Quality lightweight Block brick Manufacturing Machine we use the belt conveyor to feed materials ago, while we use the screw conveyor now. Because the screw conveyor can protect our health from the dirt compared with the belt conveyor.High Quality lightweight Block brick Manufacturing Machine integrates foaming system, feeding system, mixing system and pumping system, which is easy to operate and move, time-saving and energy-saving.

Light weight CLC block brick making machine mainly includes a mixer, a foam generator and a pump. And the pump may be the most important part for a CLC machine. There are mainly three types of foam concrete pump in market now, they are screw pump, hose pump and double cylinder piston pump. Screw pump is usually used for small capacity CLC machine, and suitable for roof insulation and floor heating.

Aircrete lightweight celullar concrete mixing machine is the ideal equipment for the production of lightweight foamed cement. It is the most advanced domestic new type of foaming equipment integrating hydraulic system, pneumatic system, quantitative conveying, and photoelectric control. The high-pressure transportation is fully automated, the construction operation is simple, and the performance is reliable.

Lowest price cellular lightweight concrete machine is program controlled, it can pump water and foam agent automatically and mix them in a certain proportion. Feeding, discharging, foaming and mixing are all automatic. This cellular lightweight concrete machine can produce about 20-30 m³ foam concrete per hour.

The excellent foam concrete brick machine is specially designed for roof insulation and floor heating. This excellent foam concrete brick machine includes a feeder, a mixer and a pump. we designed the automatic foaming system together with the pump so reduce the size

ClC Lightweight block Foamed Concrete Machine also called cement foam concrete unit or cement foam concrete machine, because it is made up by foam concrete mixer and foam concrete pump. ClC Lightweight block Foamed Concrete Machine wide used for foam concrete project, such as making blocks cast-in-situ, roof insulation and filling voids.

Clc cement mix and foaming foam brick block machines easily with relatively low pressures via hose over long distances. For applications over 4000′ such as pipe in tunnel backfill, the slurry is pumped through pipe with the pre-formed foam injected near the point of placement.

New Lightweight Foam Brick Making Machine is composed of five parts: feeding, foaming, mixing, pumping and control system. It adopts the hose pump frequency modulation pumping technology to overcome the shortage of the screw pump and plunger pump.

Cellular Lightweight Concrete Brick Making Foaming Machine is divided into two types: one type is based on hose pump, which can pump closer horizontal distance and vertical distance; the other type is based on hydraulic pump, which can pump farther horizontal distance and vertical distance.

The small portable mobile foam concrete mixer is widely used in:foamed concrete cut into parts, light wall space, fire prevention door plank core chlorine magnesium oxide and glassy magnesium foamed cement production line of the environmental protection such as composite duct foaming auxiliary equipment,and with the character of large amount of foam, use convenient, etc.

The lightweight concrete equipment for sale Philippines can be built for any size and shape block according to your demanded mould. Of course, as demand increases, you can expand your plant and increase production and make on-site lightweight concrete for such applications as blocks cast-in-situ walls, roof insulation, floor leveling, and more.

Cellular Lightweight Concrete Brick Making Foaming Machine is equipped with screw conveyor, concrete mixer, foam generator and foam concrete pump. For the foam concrete pump, we have hydraulic piston pump, hose pump and screw pump for your choice.