Small double acting hydraulic cylinder

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 700 bar high pressure double acting solid 350 ton hydraulic ram jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 700 bar high pressure double acting solid 350 ton hydraulic ram jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The carrying capacity of the 400-ton double-acting high tonnage long stroke hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 400-ton double-acting high tonnage long stroke hydraulic cylinder should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 400 ton double acting high tonnage long stroke hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

The bridge construction anchor center hole hydraulic cylinder is usually used to the construction of bridge and buildings, railway and subway, water conservancy and hydropower engineering and bridge construction anchor center hole hydraulic cylinder is suitable for the tension of group anchors with 1860-2000 sizes, Φ15.24, Φ12.7 strands.

Factory-price double-acting steel hydraulic cylinders can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more about factory price double-acting steel hydraulic cylinder information, please contact us!

If multiple 200 ton double acting hydraulic hollow ram are used to lift the same equipment, the same type of 200 ton double acting hydraulic hollow ram should be used, and the sum of the additional lifting weight of each 200 ton double acting hydraulic hollow ram should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Double-acting high tonnage pull hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, double-acting high tonnage pull hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Gaodetec is a professional high pressure 700 bar single acting super low height hydraulic lifting jack supplier in the design, production, sale and service of hydraulic jack. If you want to know more high pressure 700 bar single acting super low height hydraulic lifting jack price, please contact us!

500mm stroke long stroke double acting hydraulic cylinder used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500mm stroke long stroke double acting hydraulic cylinder has been widely used in foundation settlement tests and static piles.

Factory supply low price flange type hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, factory supply low price flange type hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

300 ton double acting electric hydraulic cylinder jack special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. 300 ton double acting electric hydraulic cylinder jack is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

100 ton single acting low height lock nut hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 100 ton single acting low height lock nut hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Leadcrete brand Double acting 200 ton hydraulic cylinder/jack/ram and electric oil pump for sale to. The tonnage of this hydraulic jack is 630 tons with 500mm stoke. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. Double acting 200 ton hydraulic cylinder/jack/ram is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double acting high tonnage hydraulic hollow jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more Double acting high tonnage hydraulic hollow jack price, please contact us!

Hydraulic cylinder double acting with flange , as industrial maintenance and installation tools that are widely used in the industry, different from the mechanical tools used in our homes, especially in the way they are maintained. If you want to know more hydraulic cylinder double acting with flange information, please contact us!

Double-acting large tonnage hydraulic jack cylinder own have the following advantages, it is accepted by many different customers. 700 Bar double acting large tonnage hydraulic jack cylinder is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 400tons stroke 300mm double acting hydraulic jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 400tons stroke 300mm double acting hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Super high-pressure small hydraulic piston cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over and can be extended with a tough pillow or steel plate at the bottom of the super high-pressure small hydraulic piston cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

The characteristics 200-ton single-acting steel hollow plunger 700 Bar hydraulic jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High-strength alloy steel is durable.

Double acting low height hydraulic cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double acting low height hydraulic cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

We have many types of hydrualic jacks: single acting ultra high pressure ultra thin hydraulic cylinder jack, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–gaodetec company professional planning to build. Different types of hydraulic jack use methods and operating precautions are not the same, single acting ultra high pressure ultra thin hydraulic cylinder jack, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

400 ton high tonnage single acting hydraulic pressure jack high quality description: The 400 ton high tonnage single acting hydraulic pressure jack high quality with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

Leadcrete Company produces 250 ton single acting lock nut hydraulic jacks for sale for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 250 ton single acting lock nut hydraulic jacks for sale has been widely used in foundation settlement tests and static piles.

Single acting spring return hydraulic cylinder jack ram characteristics:
1. Single acting spring return hydraulic cylinder jack ram , large flow quick connector, can be used for push-pull.
2. The piston part and the inner side of the guide cap are welded with copper, never pulling the cylinder, and the wear resistance is strong.
3. Honing inside the cylinder , the piston rod is hard chrome plated to prevent scratches and corrosion.
4. The extended stroke cylinder can be customized according to customer requirements.
5. In addition to vertical use, the jack can also achieve the above functions in any orientationsuch as lying, inverting, tilting, and the like.

The carrying capacity of the single acting 300 ton low profile hydraulic jack with locking collar should be greater than 1.2 times the gravity of the weight; the minimum height of the single acting 300 ton low profile hydraulic jack with locking collar is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the single acting 100 ton low profile hydraulic jack with locking collar is greater than the sum of the ties and the occipital deformation.

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

The double-acting 200ton hollow plunger hydraulic cylinder/jack/ram should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

High quality double acting high tonnage hydraulic jack is specially designed for high-frequency heavy-duty jobs and industrial production and assembly areas. Provide stronger pull and push fast piston return rate. Wide range of applications, including bridge-building and civil engineering, offshore, shipbuilding and other industries. High quality double acting high tonnage hydraulic jack can also be used as a power source in other applications.

When used double action hydraulic cylinder for hydraulic press, should strictly abide by the provisions of the main parameters, avoid ultra-overload, or when lifting height or lifting tonnage in excess of the provisions, the tank top of a serious oil spill.
Determine the focus of lifting objects, select the double action hydraulic cylinder for hydraulic press focal point, and must take into account whether the hardness of the ground pad with tough steel, so as to avoid the risk of dumping of produce when lifting.

600 ton hollow hydraulic oil cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 600 ton hollow hydraulic oil cylinder information, please contact us!

Double acting high tonnage hydraulic jacks can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.