Refractory pan mixer Laos
In order to maximize the performance of the 200kg refractory pan mixer Laos and ensure that the capacity of the mixer is fully utilized, the mixer must be operated in strict accordance with the correct steps during use.
Pay attention to the following matters when using the 200kg refractory pan mixer Laos:
1. The mixed materials must be strictly controlled. It is necessary to prevent aggregates exceeding the maximum size from entering the pot. If the size is too large, not only will the mixing be uneven, but the mixing box will also be damaged.
2. Mixing blade: its special shape and material can extend the wear life, so it should not be modified in any way. Also check daily to ensure that the blades are bolted to ensure that the edges of the disc and the wear plates of the base are not damaged: they must be replaced before they are deformed due to excessive wear: the maximum batch that should be carried should not be exceeded under any circumstances
3. Use of 200kg refractory pan mixer Laos: It is forbidden to stop and restart the mixer when there is a mixture in the pot. After the mixing process is over, the mixing materials in the pot must be completely discharged. After each mixing, the mixing disc, mixing blades, discharging trough, discharging gate and valve seat must be washed clean to prevent refractory materials from condensing on it, thereby affecting the efficiency of the 200kg refractory mixer.
