QYC single strand mono stressing jack

Leadcrete Company produces double acting hydraulic lifting jack for pile foundation testing. Double acting hydraulic lifting jack has the characteristics of large output force, light weight and long-distance operation. Double acting hydraulic lifting jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

The carrying capacity of the700 bar RRH type 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700 bar RRH type 200 ton double acting hollow hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Double acting 250 ton hydraulic cylinder price, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double acting 250 ton hydraulic cylinder.

The post tension jack for post tensioning tension equipment are used pre-stress steel wire and bridge pulling. The post tension jack for post tensioning tension equipment need match oil pump use, the power of the tension and the lift is provided by the high pressure oil at the tension pump.

Lead Equipment Co., Ltd is a professional light post tension equipment jack supplier, we have light post tension equipment jack for sale, we can supply different tonnage and stroke light post tension equipment jack.

Leadcrete brand 200t double acting ended high tonnage pull hydraulic cylinder and electric oil pump for sale to. The tonnage of this hydraulic jack is 200 tons with 200mm stoke. Because our 200t double acting ended high tonnage pull hydraulic cylinder own have the following advantages, it is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double-acting high-tonnage hydraulic cylinder is a power tool. To avoid the possibility of a major injury, read all instructions carefully before use, warnings, and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

Electric prestressing jack for construction and bridge structure is compact, the work is smooth, the oil pressure is high, the tension is large, electric prestressing jack for construction and bridge is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300 ton cheap double acting high tonnage hydraulic cylinder jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 300 ton cheap double acting high tonnage hydraulic cylinder jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Lead equipment specializes in the production of hot sell single acting high tonnage lock nut hydraulic jack, providing you with 50 ton, 100ton, 200ton, 300ton, 500ton, 600ton, 800ton, 1000ton and 1500 tons of hot sell single acting high tonnage lock nut hydraulic jack, we have many types for you choose, we can also customize according to your requirements.

10000Psi double acting hydraulic cylinder price is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 10000Psi double acting hydraulic cylinder price is been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on. If you want to know 10000Psi double acting hydraulic cylinder price, welcome to contact!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of hydraulic jack, electric pump for 30 years. 1000ton double acting steel hydraulic cylinder bench made in China are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 1000ton double acting steel hydraulic cylinder bench made in China have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

China factory double acting electric hydraulic jack price and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the China factory double acting electric hydraulic jack reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel. If you want to know more China factory double acting electric hydraulic jack price,please contact us!

Our post tension mono jack for railway jacking system should be equipped a YBZ2-2-50A electric power pack. YBZ series of power pack is a kind of plunger electric high pressure power pack, its rated pressure is 50Mpa, the power is 3kw. Its main function is supply power for hydraulic jack, button heading machine, hydraulic extruder, embossing machine and other hydraulic device.

The carrying capacity of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Hydraulic cylinder and electric hydraulic pump for mono strand stress jack must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the electric hydraulic pump for mono strand stress jack is damaged, deformed, or in need of repair, do not use! When the hydraulic jack cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of hydraulic jacks, and electric pumps for 30 years. Self-locking single-acting steel hydraulic jacks are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorages, high-rise buildings, slope reinforcement, tunnel and, and our self-locking single-acting steel hydraulic jacks have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The carrying capacity of the single acting 300 ton low profile hydraulic jack with locking collar should be greater than 1.2 times the gravity of the weight; the minimum height of the single acting 300 ton low profile hydraulic jack with locking collar is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the single acting 100 ton low profile hydraulic jack with locking collar is greater than the sum of the ties and the occipital deformation.

Leadcrete Company produces hydraulic jacks for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. 500 ton double acting hydraulic cylinder for sale is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500 ton double acting hydraulic cylinder for sale has been widely used in foundation settlement tests and static piles.

Leadcrete Company produces single acting pulling hydraulic ram cylinder for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. Single acting pulling hydraulic ram cylinder is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

Double-acting high tonnage pull hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, double-acting high tonnage pull hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Highly cost effective double acting high tonnage hydraulic cylinder jack for sale can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. So what are the precautions for the use of highly cost effective double acting high tonnage hydraulic cylinder jack for sale?

The manufacturer price single acting hydraulic jack cylinder has a very low closing height and is suitable for limited space. Manufacturer price single acting hydraulic jack cylinder is can be used for highway bridge maintenance, ship diesel engine maintenance adjustment, power plant wind power equipment maintenance adjustment and other synchronous lifting instead of rubber bearings.

The 600-ton double-acting hollow plunger hydraulic lifting cylinder can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes, and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The 600-ton double-acting hollow plunger hydraulic lifting cylinder is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof jacks are safer and last longer.

The best price multi strand post tension bridge prestressing hydraulic prestress machine jack is easy to use, but special attention should be paid to the hydraulic cylinder during use. If the best price multi strand post tension bridge prestressing hydraulic prestress machine jack fails and needs to be repaired or replaced before it can continue to be used, it will greatly reduce work efficiency and increase costs.

As a professional price for post tensioning equipment jack manufacturer, Leadcrete has produces a variety of series of post tensioning equipment jack, center hole hydraulic jacks, such as single acting center hole hydraulic jack, double acting center hole hydraulic jack and so on.

The carrying capacity of the 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the 200 ton double acting hollow hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 200 ton double acting hollow hydraulic jack is greater than the sum of the ties and the occipital deformation.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 500 ton double acting hydraulic jack price for sale, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 500 ton double acting hydraulic jack price for sale have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Lead Equipment Co., Ltd. is a manufacturer of production, design, assembly, sales and integration of 300 ton cheap double acting high tonnage hydraulic cylinder jack. The company has many years of production and sales of 300 ton cheap double acting high tonnage hydraulic cylinder jack. Manual / electric oil pumps are the main products. The main products are: hydraulic jacks, hydraulic cylinders, hollow cylinders, manual oil pumps, electric oil pumps, pump stations, and a series of hydraulic supporting products.

Lead Equipment Co., Ltd is a professional manufacturer of 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack in China. We could make kinds of standard and non-standard 700bar double acting 500 ton low profile hydraulic lifting ram jack with oil pump. The following is our 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack, they are sent to Greece.