peristaltic squeeze pump for conveying concrete and mortar

The hose squeeze pumps for mining is a sealless design that eliminates leakage and product contamination, allowing it to handle some of the most demanding pumping applications in the mining industry.

No Seals Industrial Peristaltic Pump For Pumping Refractory Materials could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Chinese squeeze type industrial hose peristaltic pump with hopper is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Industrial Peristaltic Pump For Bhutan could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Hose pump for pumping contains solid particles typical applications:
Industrial: Mining slurries, ceramic slip, concrete pumping.
Water/Wastewater: Sewage, activated sludge, lime dosing.
Food & Beverage: Fruit pulps, yeast slurries, dough.
Chemical: Paints, inks, resins with fillers.

China Manufacturer Electric Hose Pump For Waste Water is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

Trelleborg squeeze hose for concrete pump consists mainly of pump house, rotor, roller, idle roller, squeeze hose and driving unit.

Squeeze hose for foam concrete pump is a tube specially made for foam concrete pump, which satisfies abundant shape recovery and wear resistance. Squeeze hose is mainly divided into a high-elastic and wear-resistant outer layer, an anti-compression interlaced middle layer and a strong and lubricating inner layer. The material is excellent, the processing is fine, and the process is special. Different materials can be adjusted to manufacture pipes for different applications.
Hose for foam concrete pump features:
1. Uniform toughness makes the force more uniform;
2. Special anti-aging formula;
3. Strong shape recovery makes the suction stronger;
4. Internal pressure resistance up to 3MPa;
5. The fine processing size extends the service time;
6. Uniquely suitable for pumping viscous fibers and particles.

The squeeze type industrial hose peristaltic pump for pumping foam concrete with so many features, so it was widely used for masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.

customized peristaltic squeeze hose pump for filter press feed or sewage are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

We are durable industrial concrete peristaltic pumps manufacturer specialized in R & D, manufacture and sale. We have developed full series of durable industrial concrete peristaltic pumps for sale now, working pressure from 0.6-3 Mpa, output from 0.01-50 m3/h.NR, NBR and EPDM squeeze hoses are available for customization.

As a peristaltic pump manufacturer, we have wholesale peristaltic pump for slurry transfer which is high quality and having a competitive price and get much better feedback from customers. The peristaltic pump is ideal for pumping slurry and adopts frequency converter to adjust the motor speed and control the flow rate.

Oem supplier industrial peristaltic concrete pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Heavy duty hose pump for grouting cement is based on the operating characteristics of the pump hose, heavy duty peristaltic pump have much more advantage than other type pump.

Leadcrete is a leading industrial peristaltic hose pumps manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.

Industrial peristaltic pump in Vietnam is not only used individually for pump oil-based mud, bentonite, grout, slurry and concrete etc, but also be used for supporting the use of other equipment. For example, together with filter press machine, using for pumping filtrate.

China is one of the largest peristaltic pump manufacturers in the world, with a large number of peristaltic pump manufacturers. The products provided by these manufacturers are widely used in many industries such as pharmaceuticals, food and beverages, chemicals, and environmental water treatment.

Chemical resistance peristaltic pump hoses are specifically designed to resist the corrosive effects of various chemicals, acids, and alkalis. These hoses are made of materials that can withstand aggressive chemicals and maintain their structural integrity without breaking down or degrading over time. The most common materials used in these hoses are natural and synthetic rubbers, such as EPDM and silicone. EPDM is known for its excellent resistance to acids and alkalis, while silicone has excellent resistance to high temperatures and low-pressure applications.

The working principle of the peristaltic pump is to periodically squeeze and release the hose through a roller or a pressure block, thereby forming negative and positive pressure in the hose to drive the fluid for transportation. During the feeding process of the filter press, the peristaltic pump continuously and stably delivers the liquid into each filter chamber of the filter press to ensure the smooth progress of the filtration process.

Industrial Hose Squeeze Pump for Waste Water Applicable Scenarios:
In wastewater treatment, industrial hose squeeze pumps are often used in the following scenarios:
Wastewater transmission: used to transfer wastewater from one place to another, especially when a large amount of wastewater needs to be treated, the pump can provide stable and continuous fluid transmission.
Sludge treatment: Sludge is often produced during wastewater treatment. Industrial hose squeeze pumps can treat sludge containing solid particles and transport it to designated treatment equipment.
Chemical dosing: In the process of wastewater treatment, chemicals are sometimes needed to change the properties of wastewater or remove pollutants. Industrial hose squeeze pumps can accurately control the amount of chemicals added to ensure the effect of wastewater treatment.

Industrial Hose Squeeze Pump for Waste WaterMain features
No pollution: The fluid only contacts the hose, not the pump body, avoiding the contamination of the pump body to the fluid.
High precision: It can accurately control the flow and pressure of the fluid to meet the precise control requirements in the wastewater treatment process.
Low shear force: The shear force on the fluid is small, suitable for conveying shear-sensitive or highly corrosive fluids.
Good sealing: As the only sealing part, the hose can provide a good sealing effect to prevent fluid leakage.
Easy maintenance: The hose is the only vulnerable part of the pump, which is easy to replace and has low maintenance cost.

Hose type concrete pump for pumping foam concrete is designed based on the peristaltic pump, the peristaltic concrete pump uses high pressure, wear resisting extruded tubes. Hose type concrete pump for pumping foam concrete is used for pumping lightweight form concrete, mortar and refractory materials. Hose type concrete pump for pumping foam concrete also could be used for spraying concrete or refractory materials.

Industrial high volume hose pumps in shale gas project is widely used in shale gas project, the working principle is that the rolles rotate and squeeze hose generating negative pressure in the hose, sucking slurries and discharging through outlet under rollers’ push, finally forms pressure conveying of slurries.

LCP20H-H hose type concrete pump for pumping refractory materials has strong self-priming ability, large flow rate, and easy operation. Hose type concrete pump for pumping refractory materials is suitable for conveying concrete, mud, bentonite, cement foam concrete, and handling erosion, high viscosity, high density products.

China factory concrete industrial peristaltic hose pump was widely used for masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.

LCP15H-D diesel squeeze concrete pump was designed based on the squeeze hose pump, the diesel squeeze concrete pump uses high pressure, wear resisting extruded tubes. More widely used for pumping foam concrete, lightweight form concrete, mortar and refractory materials. The diesel squeeze concrete pump also could be used for spraying concrete or refractory materials.

The squeeze concrete pump hose is a high-performance pipe made from compounded rubbers and reinforced with synthetic fibers. The addition of these fibers enhances the overall performance of the pipe body, making it more durable and resistant to both positive and negative pressure, acid, alkali, and high temperatures. Thanks to its unique design, squeeze concrete pump hose can transport more than 90% of today’s chemicals while generating low heat, exhibiting good recovery, and being durable.

Peristaltic dosing pump popular in malaysia is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Ce Iso Durable Industrial Hose Squeeze Pumps With Adjustable Flow Rate could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Tunneling Machine Used Industrial Hose Pump is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

High Performance Hose Pump For Oil Base Mud usually consists mainly of pump hose, rotor, roller, idle rollers, squeeze hose and driving unit etc. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure is this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.