Peristaltic Hose Pump

Trelleborg squeese hose has the characteristics of long service life and a wide application range. Its structure is a high-strength synthetic fiber braid layer reinforced by one or more layers. The inner and outer linings of the Trelleborg squeese hose are extruded. The inner lining is made of a series of compound rubber.

Squeeze hose manufacturers provide peristaltic pump squeeze hose product structure, peristaltic pump squeeze hose application fields, and peristaltic pump squeeze hose use precautions and other related information.
The product structure of the squeeze hose: the inner rubber is natural high wear-resistant rubber, the middle is high elastic nylon thread, and the outer layer is high wear-resistant and anti-aging rubber.

Trelleborg hose of squeeze hose pump has the characteristics of long service life and a wide application range. Its structure is a high-strength synthetic fiber braid layer reinforced by one or more layers. The inner and outer linings of the Trelleborg squeeze hose are extruded, and the composite rubber lining is used. The tube body is soft, elastic, and has good wear resistance. Synthetic fibers are added to the pipe body to enhance its overall performance of the pipe body. Low heat generation during use, good resilience, and durability.

Squeeze hose for hose pump has a long service life and a wide range of applications; its structure is a high-strength synthetic fiber braided layer reinforced by one or more layers. The inner and outer linings of the squeeze hose are extruded, and the inner lining is made of A range of compound rubbers. The tube body is soft, full of high-strength elasticity, and has good wear resistance. Synthetic fibers are added to the pipe body to enhance the overall performance of the pipe body, low heat generation during use, good recovery, and durability. The hose has good resistance to positive and negative pressure and has good acid, alkali, oil high temperature, and other characteristics. It can transport more than 90% of today’s chemicals. The main components are natural rubber (resistance to general weak acids and alcohol), nitrile rubber (resistance to grease, alkali metals, and detergents, etc.), and EPDM rubber (suitable for ketones, alcohols, and concentrated acids), etc.

The working principle of the Squeeze hose peristaltic pump is based on the alternate expansion and contraction of the elastic squeeze hose to transport substances, and its operation is as simple as our throat and esophagus. The squeeze hose with smooth inner wall and reliable strength is installed inside the pump body, and is rotated and squeezed by two protrusions on the turntable. This kind of rotation makes the medium transport in one direction without backflow, which can make the pump applied to the occasion of precise metering, and the pressure can reach 16Bar / 230psi. The shape recovery of the squeeze hose after conveying the medium can generate a full vacuum in the pipe to suck the medium into the pipe, so the use of the squeeze hose peristaltic pump can convey extremely viscous media without problems. Fill the lower part of the pump body with a specially designed lubricating oil grade to lubricate the squeeze hose and reduce the temperature so that the squeeze hose has a longer service life. Since the medium only contacts the squeeze hose for peristaltic pump and does not contact any other parts, the squeeze hose peristaltic pump is very suitable for conveying abrasive and high-viscosity media.

Squeeze hose for concrete pump application:
The extruded tubes for extruded pumps produced by our company are widely used in pump body accessories for construction, highways, tunnels, bridges, water conservancies, mines, lines, and other construction projects.

Squeeze hose for foam concrete pump is a tube specially made for foam concrete pump, which satisfies abundant shape recovery and wear resistance. Squeeze hose is mainly divided into a high-elastic and wear-resistant outer layer, an anti-compression interlaced middle layer and a strong and lubricating inner layer. The material is excellent, the processing is fine, and the process is special. Different materials can be adjusted to manufacture pipes for different applications.
Hose for foam concrete pump features:
1. Uniform toughness makes the force more uniform;
2. Special anti-aging formula;
3. Strong shape recovery makes the suction stronger;
4. Internal pressure resistance up to 3MPa;
5. The fine processing size extends the service time;
6. Uniquely suitable for pumping viscous fibers and particles.

Squeeze pump hose is also called rubber squeeze tube, squeeze tube, and surround squeeze tube.25 bar wp squeeze pump hose operating principle is:
The rubber hose is flattened by the shaft wheel of the pump and then loosened, so that the rubber hose returns to its original shape by its own elasticity, so that a vacuum is generated in the pipe to suck the mortar in the storage tank, and then the mortar is pushed forward under the extrusion of the shaft wheel.

The Squeeze Hose Quality Peristaltic Pump belongs to the rotor type volumetric pump. It is by the elasticity of the flexible element (hose) in the pump and the rotor on the roller or slide shoe work.

They have a good self-priming ability, almost perfect vacum to absorb liquid; transport foam and bubbles without air resistance; conveying high viscosity and shear sensitive medium is also strong.

High Precision Liquid Transfer Peristaltic Pumps have been used in industry for many years. The original design of the hose pump can even be traced back to more than half a century ago. Hose pumps were first used by firefighters in the U.S. state of Connecticut to transport lime slurry.

The Peristaltic Pump for Automatic Liquid belongs to the category of peristaltic pumps. A peristaltic pump is a kind of rotor type volumetric pump because its working principle is similar to the digestive tract’s peristaltic way of transporting gas, solid, or liquid three-phase medium and is named.

Wrapping the hose with a protective cover and curing it as part of the final bonding phase is the hose fabrication process. The hose is precision machine ground when it has cooled. This final stage distinguishes our hose from the several others on the market.

Peristaltic Pump/High-Pressure Chemical Pump Pump housing, rotor, roller, idle roller, squeezing tube, and driving unit are the key components of a peristaltic pump. In the pump house, the squeeze hose is U-shaped, and when the rotor pushes the rollers to revolve, the hose is distorted. The distorted hose regains its elasticity once the roller rotates. Thus, negative pressure is formed in this hose, sucking slurry and discharging via outlet under roller’s push, resulting in slurry pressure conveying.

The Hose Squeeze Peristaltic Industrial Hose Pump is a new type of multifunctional industrial pump that was developed by absorbing sophisticated technology from abroad. The Hose Squeeze Peristaltic Industrial Hose Pump eliminates the standard pump impeller and shaft seal, providing significant benefits in moving media with high viscosity, corrosion, and substantial fluid contaminants.

Peristaltic Pump Pump hose, rotor, roller, idle rollers, squeeze hose, and driving unit are the most common components of a High Progress Low Noise Water Pump. In the pump house, the squeezing hose is U-shaped, and as the rotor pushes the roller to rotate, the hose is distorted. The distorted hose regains its elasticity once the roller rotates. Thus, negative pressure is formed in this hose, sucking slurry and discharging via outlet under roller’s push, resulting in slurry conveying under pressure.

Architecture, subterranean construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping, and other projects could all benefit from a High Quality Squeeze Peristaltic Hose Pump.

The peristaltic pump from an experienced supplier is a new multi-functional, multi-purpose industrial pump. Chemicals, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, papermaking, and other industries can all benefit from it.

There are dozens of industrial hose pump models with working pressure range of 0.6-3MPa and displacement range of 0.01-50 cubic meters per hour. The extruded hose material is available in NR (industrial grade, food grade), NBR and EPDM according to customer requirements.

Peristaltic Hose Pump for transferring Cement Mortar Slurry could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Heavy-duty Abrasion Resistance Industries Hose Pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

High Abrasion Hose Peristaltic Pump For Pumping Concrete are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Hot Sell Direct Driver Peristaltic Squeeze Hose Pump is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Usually Industrial Peristaltic Hose Squeeze Pump For Mortar is widely applied in industry project, such as chemical industry, papermaking, printing and dyeing, food and construction engineering, etc. Usually only squeeze hose into contact with the material, could change different squeeze hose accord to characteristics of pumping materials.

Full Sealed Hose Squeeze Pump For Light Weight Concrete is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Short Down Time Variable Speed Rotary Peristaltic Pump For Kuwait is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Squeeze Type Industrial Hose Pump For Grouting Cement is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Cheap Peristaltic Pump Used For Pumping Mortar is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Industrial Peristaltic Pump For Bhutan could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Tunneling Machine Used Industrial Hose Pump are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.