Low price double acting hydraulic jack cylinder

The carrying capacity of the 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the 200 ton double acting hollow hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 200 ton double acting hollow hydraulic jack is greater than the sum of the ties and the occipital deformation.

Our post tension mono jack for railway jacking system should be equipped a YBZ2-2-50A electric power pack. YBZ series of power pack is a kind of plunger electric high pressure power pack, its rated pressure is 50Mpa, the power is 3kw. Its main function is supply power for hydraulic jack, button heading machine, hydraulic extruder, embossing machine and other hydraulic device.

When used double action hydraulic cylinder for hydraulic press, should strictly abide by the provisions of the main parameters, avoid ultra-overload, or when lifting height or lifting tonnage in excess of the provisions, the tank top of a serious oil spill.
Determine the focus of lifting objects, select the double action hydraulic cylinder for hydraulic press focal point, and must take into account whether the hardness of the ground pad with tough steel, so as to avoid the risk of dumping of produce when lifting.

Leadcrete Company produces 350 ton double-acting high-tonnage hydraulic cylinders for pile foundation testing. It has the characteristics of large output force, lightweight and long-distance operation. 350-ton double-acting high-tonnage hydraulic cylinder is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull, and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering, and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a 350-ton double-acting high-tonnage hydraulic cylinder has been widely used in foundation settlement tests and static piles.

The attention of 200 ton single acting small high tonnage hydraulic jack for lifting :
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This machine uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

Lead Equipment as a double-acting synchronous jack supplier, we not only supply double-acting synchronous jacks but also supply double-acting hydraulic cylinders, electric oil pumps, hydraulic hand pumps, and another related hydraulic tool. Because the type double acting synchronous jack suppliers are not standard, we could accept customized kinds of different tonnage and stroke lifting hydraulic cylinders.

Double-acting high-tonnage hydraulic cylinder is a power tool. To avoid the possibility of a major injury, read all instructions carefully before use, warnings, and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

Single acting spring return hydraulic cylinder jack ram characteristics:
1. Single acting spring return hydraulic cylinder jack ram , large flow quick connector, can be used for push-pull.
2. The piston part and the inner side of the guide cap are welded with copper, never pulling the cylinder, and the wear resistance is strong.
3. Honing inside the cylinder , the piston rod is hard chrome plated to prevent scratches and corrosion.
4. The extended stroke cylinder can be customized according to customer requirements.
5. In addition to vertical use, the jack can also achieve the above functions in any orientationsuch as lying, inverting, tilting, and the like.

The carrying capacity of the 350 ton double acting hollow hydraulic jacks should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the 350-ton double-acting hollow hydraulic jacks is greater than the sum of the ties and the occipital deformation.

Leadcrete is a professional high pressure 10000psi single acting hydraulic jack for pulling supplier in the design, production, sale and service of hydraulic jack.

First, 400 ton double acting hydraulic cylinder jacks description: The 400 ton double acting hydraulic cylinder jacks with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 400 ton double acting hydraulic cylinder jacks with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. 400 ton double acting hydraulic cylinder jacks, spring retraction (reset). High strength alloy steel is durable.

500 bar 400T stroke double acting hydraulic oil cylinder for special projects can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 500 bar 400T stroke double acting hydraulic oil cylinder for special projects price, please contact us!

We have many types of hydrualic jacks: single acting ultra high pressure ultra thin hydraulic cylinder jack, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–gaodetec company professional planning to build. Different types of hydraulic jack use methods and operating precautions are not the same, single acting ultra high pressure ultra thin hydraulic cylinder jack, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

China top hydraulic jack supplier, supply full complete set of 5-2000 ton single-acting pancake self-locking type hydraulic jack, double acting hydraulic jack, hollow hydraulic jack, flange hydraulic jack, lock nut hydraulic jack, electric oil pump, prestressed hydraulic jack, mono strand jack and other equipments.
As per clients’ demand, we can customize different single-acting pancake self-locking type hydraulic jack. If you want standard or non-standard single-acting pancake self-locking type hydraulic jack or electric pump station, welcome to send inquiry to us, thanks so much.

The application of 300ton double acting steel hydraulic piston cylinder Made In China:
1. If the oil quantity of the pump body is insufficient, it is necessary to first add working oil (10# oil) to the pump to work.
2, estimated weight, should not be overloaded.
3. Determine the center of gravity of the lifting object and select the point of gravity of the jack. At the same time, it must take into account whether the softness and hardness of the ground are padded with tough wood to avoid the risk of dumping when lifting.
4. After the jack lifts the heavy object, the heavy material should be supported in time with the tough wood. It is forbidden to use the jack as a support. It is forbidden to use several jacks at the same time to avoid the imbalance of load and the danger of dumping.
5. When using, first connect the quick joint of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the cylinder.
6. Please refer to the instruction manual for the electric pump.

The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double acting micro hydraulic cylinder made in China. Double acting micro hydraulic cylinder made in China is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

In order to guarantee our 200tons hydraulic hollow jack cylinder with hydraulic power pack can be exported to European countries, we apply two CE Certificates for our 200tons hydraulic hollow jack cylinder and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries. If you want to know more 20tons single acting hydraulic hollow jack cylinder information, please contact us!

300 ton double acting steel hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe. If you want to know more 300 ton double acting steel hydraulic cylinders information, please contact us!

500 bar 200T long stroke double-acting construction hydraulic cylinder is also a double-acting hydraulic jack, which is also a separate hydraulic jack. Unlike the single-acting hydraulic jack, it relies on the double-acting hydraulic pump station to provide power. In general, 500 bar 200T long stroke double acting construction hydraulic cylinder is large. Tonnage, large stroke hydraulic jack, double-acting hydraulic jack load tonnage is basically between 100T-1000T, can be made into various types of hydraulic jacks according to customer needs.

750t capacity double acting hydraulic cylinder and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the 750t capacity double acting hydraulic cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Leadcrete Company produces 1000 ton hydraulic jack double acting hydraulic cylinder for pile foundation testing. 1000 ton hydraulic jack double acting hydraulic cylinder has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

50 ton single acting thin hydraulic jack cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 50 ton single acting thin hydraulic jack cylinder price, please contact us!

400 ton high tonnage single acting hydraulic pressure jack high quality description: The 400 ton high tonnage single acting hydraulic pressure jack high quality with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of hydraulic jacks, and electric pumps for 30 years. Self-locking single-acting steel hydraulic jacks are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorages, high-rise buildings, slope reinforcement, tunnel and, and our self-locking single-acting steel hydraulic jacks have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Leadcrete brand high quality 250 ton double acting hydraulic jack and electric oil pump for sale to Russian. The tonnage of this high quality 250 ton double acting hydraulic jack is 250 tons with 500mm stoke. If you want to know more high quality 250 ton double acting hydraulic jackinformation, please contact us!

High capacity 45mm stroke single acting pancake lock nut hydraulic jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more high capacity 45mm stroke single acting pancake lock nut hydraulic jack information, please contact us!

Large double acting high tonnage hollow hydraulic jack own have the follow advantages, it is accepted by many different customers. Large double acting high tonnage hollow hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double acting high tonnage hydraulic hollow jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more Double acting high tonnage hydraulic hollow jack price, please contact us!

The design of CLL cheap single acting self-locking type hydraulic jack is the perfect combination of hydraulic principle and mechanical principle. Cheap single acting self-locking type hydraulic jack has thread in the whole stroke range of volcano rod. After fully lifting, the self-locking nut can be unscrewed until it is against the cylinder block. Free lock nut and the cylinder is stressed, so that the oil pump can be removed, which is especially suitable for the continuous and test operation of the truss and truss.

Leadcrete Company produces single acting pulling hydraulic ram cylinder for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. Single acting pulling hydraulic ram cylinder is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.