Low price double acting heavy duty hollow hydraulic jack

Hydraulic cylinder and electric hydraulic pump for mono strand stress jack must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the electric hydraulic pump for mono strand stress jack is damaged, deformed, or in need of repair, do not use! When the hydraulic jack cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

This electric single action hydraulic jack for sale can directly conduct pressure test on the pressure vessel, equipped with special tools for lifting, bending, straightening, extrusion, shearing, riveting, jacking, stretching, disassembly, punching, construction steel bar extrusion, Various operations such as bridges and construction machinery. If you want to know more electric single action hydraulic jack for sale, please contact us!

If multiple single acting flat hydraulic jack are used to lift the same equipment, the same type of single acting flat hydraulic jack should be used, and the sum of the additional lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

The carrying capacity of the 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the 200 ton double acting hollow hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 200 ton double acting hollow hydraulic jack is greater than the sum of the ties and the occipital deformation.

Our post tension mono jack for railway jacking system should be equipped a YBZ2-2-50A electric power pack. YBZ series of power pack is a kind of plunger electric high pressure power pack, its rated pressure is 50Mpa, the power is 3kw. Its main function is supply power for hydraulic jack, button heading machine, hydraulic extruder, embossing machine and other hydraulic device.

Lead Equipment Co., Ltd is a professional manufacturer of hydraulic cylinder for pulling with power pack in China. We could make kinds of standard and non-standard hydraulic cylinders for pulling with the oil pump.

Best price double acting large hydraulic cylinder jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, Best price double acting large hydraulic cylinder jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Leadcrete brand 500tons stroke 150mm double acting hydraulic jack and electric oil pump own have the following features, promise quality.
500tons stroke 150mm double acting hydraulic jack, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. It is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

500 bar 200T long stroke double-acting construction hydraulic cylinder is also a double-acting hydraulic jack, which is also a separate hydraulic jack. Unlike the single-acting hydraulic jack, it relies on the double-acting hydraulic pump station to provide power. In general, 500 bar 200T long stroke double acting construction hydraulic cylinder is large. Tonnage, large stroke hydraulic jack, double-acting hydraulic jack load tonnage is basically between 100T-1000T, can be made into various types of hydraulic jacks according to customer needs.

The double-acting 200ton hollow plunger hydraulic cylinder/jack/ram should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Leadcrete brand single acting hydraulic cylinder jack and electric oil pump for sale. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. single acting hydraulic cylinder jack is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Leadcrete brand 200t double acting ended high tonnage pull hydraulic cylinder and electric oil pump for sale to. The tonnage of this hydraulic jack is 200 tons with 200mm stoke. Because our 200t double acting ended high tonnage pull hydraulic cylinder own have the following advantages, it is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

750t capacity double acting hydraulic cylinder and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the 750t capacity double acting hydraulic cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Electric prestressing jack for construction and bridge structure is compact, the work is smooth, the oil pressure is high, the tension is large, electric prestressing jack for construction and bridge is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

Leadcrete brand 300ton double acting steel custom hydraulic cylinder and electric oil pump own have the following features, promise quality.
300ton double-acting steel custom hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear-resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. It is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

In the word, the YDC series bridge hydraulic jack for concrete post tension ‘ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in our bridge hydraulic jack for concrete post tension , pls contact us freely.

50 100 200 500 ton hydraulic cylinder for sale. Our Gaode equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 50 100 200 500 ton hydraulic cylinder for sale, electric pump for 30 years.

The bridge construction anchor center hole hydraulic cylinder is usually used to the construction of bridge and buildings, railway and subway, water conservancy and hydropower engineering and bridge construction anchor center hole hydraulic cylinder is suitable for the tension of group anchors with 1860-2000 sizes, Φ15.24, Φ12.7 strands.

In order to guarantee our double acting 250 ton hydraulic jack with hydraulic power pack can be exported to European countries, we apply two CE Certificate for our double acting 250 ton hydraulic jack and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries.

When used double action hydraulic cylinder for hydraulic press, should strictly abide by the provisions of the main parameters, avoid ultra-overload, or when lifting height or lifting tonnage in excess of the provisions, the tank top of a serious oil spill.
Determine the focus of lifting objects, select the double action hydraulic cylinder for hydraulic press focal point, and must take into account whether the hardness of the ground pad with tough steel, so as to avoid the risk of dumping of produce when lifting.

High capacity 45mm stroke single acting pancake lock nut hydraulic jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more high capacity 45mm stroke single acting pancake lock nut hydraulic jack information, please contact us!

Lead Equipment Co., Ltd is a professional manufacturer of single acting spring return hydraulic jack with power pack in China. We could make kinds of standard and non-standard single acting spring return hydraulic jack with oil pump. The following is our single acting spring return hydraulic jack, they are sent to Greece.

The application of 300ton double acting steel hydraulic piston cylinder Made In China:
1. If the oil quantity of the pump body is insufficient, it is necessary to first add working oil (10# oil) to the pump to work.
2, estimated weight, should not be overloaded.
3. Determine the center of gravity of the lifting object and select the point of gravity of the jack. At the same time, it must take into account whether the softness and hardness of the ground are padded with tough wood to avoid the risk of dumping when lifting.
4. After the jack lifts the heavy object, the heavy material should be supported in time with the tough wood. It is forbidden to use the jack as a support. It is forbidden to use several jacks at the same time to avoid the imbalance of load and the danger of dumping.
5. When using, first connect the quick joint of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the cylinder.
6. Please refer to the instruction manual for the electric pump.

50 ton single acting thin hydraulic jack cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 50 ton single acting thin hydraulic jack cylinder price, please contact us!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of double acting 750 Ton hydraulic cylinder/jack/ram, electric pump for 30 years. Double acting 750 Ton hydraulic cylinder/jack/ram are widely used in roads, railways, bridges, city interchanges, hydropower station dams, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

We have many types of hydrualic jacks: single acting ultra high pressure ultra thin hydraulic cylinder jack, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–gaodetec company professional planning to build. Different types of hydraulic jack use methods and operating precautions are not the same, single acting ultra high pressure ultra thin hydraulic cylinder jack, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

Lead Equipment as a single acting hollow synchronous hydraulic jack cylinders supplier, we not only supply single acting hollow synchronous hydraulic jack cylinders, but also supply double acting hydraulic cylinder, electric oil pump, hydraulic hand pump and other related hydraulic tool. Because the type single acting hollow synchronous hydraulic jack cylinders is not standard, we could accept to customize kinds of different tonnage and stroke lifting hydraulic cylinder.

Single acting hydraulic jack cylinder description: The single acting hydraulic jack cylinder with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

Double-acting hydraulic cylinder and electric pump must be on a sturdy surface so that the double-acting hydraulic cylinder can withstand the load, the load must be placed in the center, covering all pistons, and can only load stationary objects.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of hydraulic jack, electric pump for 30 years. 500 ton double acting high tonnage hollow hydraulic jack is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 500 ton double acting high tonnage hollow hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.