Long stroke double acting high tonnage hydraulic cylinder

Double-acting hydraulic cylinder and electric pump must be on a sturdy surface so that the double-acting hydraulic cylinder can withstand the load, the load must be placed in the center, covering all pistons, and can only load stationary objects.

150 ton hot sell single acting steel lock nut hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 150 ton hot sell single acting steel lock nut hydraulic jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

If multiple 10000Psi single acting steel lock nut hydraulic plunger cylinder with low price are used to lift the same equipment, the same type of hydraulic jacks should be used, and the sum of the additional lifting weight of each 10000Psi single acting steel lock nut hydraulic plunger cylinder with low price should not be less than 1.5 times the gravity of the equipment.
10000Psi single acting steel lock nut hydraulic plunger cylinder with low price should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of double acting 750 Ton hydraulic cylinder/jack/ram, electric pump for 30 years. Double acting 750 Ton hydraulic cylinder/jack/ram are widely used in roads, railways, bridges, city interchanges, hydropower station dams, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300 ton cheap double acting high tonnage hydraulic cylinder jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 300 ton cheap double acting high tonnage hydraulic cylinder jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

High quality 1000 ton double acting 700bar hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. High quality 1000 ton double acting 700bar hydraulic cylinder special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack.

Factory price hydraulic tensioning prestressed jack is our YDC6500 post tension hollow hydraulic jack, it is customized our customer from US. Tonnage is 650 tons, stroke is 200mm, closed height is 410mm, outer diameter is 557mm. Factory price hydraulic tensioning prestressed jack is more convenient, light and new design jack. It has compact structure, perfect seal performance, light weight, small dimension and many other features. The factory price hydraulic tensioning prestressed jack is used for stressing 27 pc strands, and it need to equip a 60Mpa 4L/min electric oil pump.

First, 200t capacity single-acting pull hydraulic jack description: The single-acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction, and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 200t capacity single-acting pull hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High-strength alloy steel is durable.

Leadcrete Company produces 350 ton double-acting high-tonnage hydraulic cylinders for pile foundation testing. It has the characteristics of large output force, lightweight and long-distance operation. 350-ton double-acting high-tonnage hydraulic cylinder is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull, and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering, and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a 350-ton double-acting high-tonnage hydraulic cylinder has been widely used in foundation settlement tests and static piles.

Low profile horizontal hydraulic piston cylinder own have the follow advantages, low profile horizontal hydraulic piston cylinder is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, low profile horizontal hydraulic piston cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

We have many types of hydrualic jacks: single acting spring return hydraulic cylinder, single-acting thin jacks, single acting spring return hydraulic cylinder are all hydraulic jacks–leadcrete company professional planning to build. Different types of single acting spring return hydraulic cylinder use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

The hot sale China prestressing steel jack for post tensioning is mainly used for the overall pulling force of the group anchor. The jack is easy to operate, reliable and saves steel strands than other types of jacks. Hot sale China prestressing steel jack for post tensioning is mainly used for bridge construction and other projects that use products such as anchor bolts and tensile equipment. If you want to know more hot sale China prestressing steel jack for post tensioning information, please contact us!

High quality double acting high tonnage hydraulic jack is specially designed for high-frequency heavy-duty jobs and industrial production and assembly areas. Provide stronger pull and push fast piston return rate. Wide range of applications, including bridge-building and civil engineering, offshore, shipbuilding and other industries. High quality double acting high tonnage hydraulic jack can also be used as a power source in other applications.

500T 1000mm stroke double acting hydraulic oil cylinder for special projects and electric oil pump for sale to Russian. The tonnage of this hydraulic jack is 500 tons with 1000mm stoke. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. According to customer’s requirement, we add a 80mm thickness round flange for this 500T 1000mm stroke double acting hydraulic oil cylinder for special projects. This flange is with thread in the wall, it could be dismountable. It is very convenient for customers.

The application of 300ton double acting steel hydraulic piston cylinder Made In China:
1. If the oil quantity of the pump body is insufficient, it is necessary to first add working oil (10# oil) to the pump to work.
2, estimated weight, should not be overloaded.
3. Determine the center of gravity of the lifting object and select the point of gravity of the jack. At the same time, it must take into account whether the softness and hardness of the ground are padded with tough wood to avoid the risk of dumping when lifting.
4. After the jack lifts the heavy object, the heavy material should be supported in time with the tough wood. It is forbidden to use the jack as a support. It is forbidden to use several jacks at the same time to avoid the imbalance of load and the danger of dumping.
5. When using, first connect the quick joint of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the cylinder.
6. Please refer to the instruction manual for the electric pump.

The attention of 250 ton double acting solid hydraulic ram jack with pump for sale:
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This 250 ton double acting solid hydraulic ram jack uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

Double-acting high tonnage hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear-resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double-acting high-tonnage hydraulic cylinder.

The factory price synchronous hydraulic jack cylinders is mainly used for lifting heavy object. If you tell me your tonnage, stroke, center hole and outer diameter, etc. We can make factory price synchronous hydraulic jack cylinders according to your detail requirement. If you want to know more factory price synchronous hydraulic jack cylinders information,please contact us!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 250 ton steel double acting hydraulic cylinders, electric pump for 30 years. 250 ton steel double acting hydraulic cylinders are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Single acting steel lock nut hydraulic cylinder for wholesales features: Used for lifting and mechanical load support. The threaded piston has a wear-resistant coating and the inner wall of the cylinder is hard chrome plated. Absolute mechanical locking load. The high temperature painted surface is resistant to corrosion and impact.
Support customization, can be customized special specifications hydraulic jack. If you want to know more Single acting steel lock nut hydraulic cylinder for wholesales price, please contact us!

Lead Equipment as a double-acting synchronous jack supplier, we not only supply double-acting synchronous jacks but also supply double-acting hydraulic cylinders, electric oil pumps, hydraulic hand pumps, and another related hydraulic tool. Because the type double acting synchronous jack suppliers are not standard, we could accept customized kinds of different tonnage and stroke lifting hydraulic cylinders.

Our flange hydraulic cylinders own have the follow advantages, it is accepted by many different customers. Flange hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Hydraulic jack with double acting can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure, and the installation of supporting equipment. If you want to know more about hydraulic jacks with double-acting information, please contact us!

Lead Equipment as a hot sale double acting lifting jack for synchronous lifting pushing supplier, we not only supply hot sale double acting lifting jack for synchronous lifting pushing, but also supply double acting hydraulic cylinder, electric oil pump, hydraulic hand pump and other related hydraulic tool. Because the type hot sale double acting lifting jack for synchronous lifting pushing is not standard, we could accept to customize kinds of different tonnage and stroke lifting hydraulic cylinder.

Factory supply double acting prestress equipment jack is compact, the work is smooth, the oil pressure is high, the tension is large. Factory supply double acting prestress equipment jack is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

Double-acting high-tonnage hydraulic cylinder is a power tool. To avoid the possibility of a major injury, read all instructions carefully before use, warnings, and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 500 ton double acting hydraulic jack price for sale, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 500 ton double acting hydraulic jack price for sale have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Gaodetec is a professional high pressure 700 bar single acting super low height hydraulic lifting jack supplier in the design, production, sale and service of hydraulic jack. If you want to know more high pressure 700 bar single acting super low height hydraulic lifting jack price, please contact us!

Small double-acting hydraulic cylinder and electric oil pump for sale to Russia. The tonnage of this hydraulic jack is 250 tons with 200mm stroke. Because our small double-acting hydraulic cylinder parts hydraulic jack own have the following advantages, it is accepted by many different customers.

High quality double acting small hydraulic cylinder used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, high quality double acting small hydraulic cylinder has been widely used in foundation settlement tests and static piles.