Large tonnage 500 ton double acting hydraulic jack

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

Leadcrete Company produces double acting high tonnage 200 tons hydraulic jack for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, double acting high tonnage 200 tons hydraulic jack has been widely used in foundation settlement tests and static piles.

The hydraulic jack prestress for construction and building is usually used to the construction of bridge and buildings, railway and subway, water conservancy and hydropower engineering and hydraulic jack prestress for construction and building is suitable for the tension of group anchors with 1860-2000 sizes, Φ15.24, Φ12.7 strands.

The double-acting 200ton hollow plunger hydraulic cylinder/jack/ram should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Leadcrete Company produces single acting pulling hydraulic ram cylinder for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. Single acting pulling hydraulic ram cylinder is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of 200t capacity single-acting hydraulic jack, electric pump for 30 years. 20t capacity single-acting hydraulic jacks are widely used in road, railway, bridge, city interchanges, hydropower station dams, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnels and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The manufacturer price single acting hydraulic jack cylinder has a very low closing height and is suitable for limited space. Manufacturer price single acting hydraulic jack cylinder is can be used for highway bridge maintenance, ship diesel engine maintenance adjustment, power plant wind power equipment maintenance adjustment and other synchronous lifting instead of rubber bearings.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300-ton double hollow jack hydraulic cylinder, electric pump for 30 years. 300 ton double hollow jack hydraulic cylinders are widely used in roads, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

100 ton single acting low height lock nut hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 100 ton single acting low height lock nut hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300 ton cheap double acting high tonnage hydraulic cylinder jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 300 ton cheap double acting high tonnage hydraulic cylinder jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

250 ton hydraulic cylinder for sale, Zhengzhou Lead Equipment will continue to provide customers with high quality 250 ton hydraulic cylinder, as well as provide you with the first time after-sales service, welcome your call to visit!

High strength double acting high tonnage hydraulic jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more about high strength double acting high tonnage hydraulic jack prices, please contact us!

600 ton hollow hydraulic oil cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 600 ton hollow hydraulic oil cylinder information, please contact us!

First, 200t capacity single-acting pull hydraulic jack description: The single-acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction, and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 200t capacity single-acting pull hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High-strength alloy steel is durable.

The carrying capacity of the700 bar RRH type 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700 bar RRH type 200 ton double acting hollow hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

Double-acting hollow hydraulic jack is suitable for high-tonnage lifting operations, and requires high-precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, Double acting hollow hydraulic jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

In order to guarantee our double acting 250 ton hydraulic jack with hydraulic power pack can be exported to European countries, we apply two CE Certificate for our double acting 250 ton hydraulic jack and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries.

The carrying capacity of the 350 ton double acting hollow hydraulic jacks should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the 350-ton double-acting hollow hydraulic jacks is greater than the sum of the ties and the occipital deformation.

Hydraulic cylinder double acting with flange , as industrial maintenance and installation tools that are widely used in the industry, different from the mechanical tools used in our homes, especially in the way they are maintained. If you want to know more hydraulic cylinder double acting with flange information, please contact us!

Leadcrete is a professional high pressure 10000psi single acting hydraulic jack for pulling supplier in the design, production, sale and service of hydraulic jack.

Double-acting large tonnage hydraulic jack cylinder own have the following advantages, it is accepted by many different customers. 700 Bar double acting large tonnage hydraulic jack cylinder is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The design of CLL cheap single acting self-locking type hydraulic jack is the perfect combination of hydraulic principle and mechanical principle. Cheap single acting self-locking type hydraulic jack has thread in the whole stroke range of volcano rod. After fully lifting, the self-locking nut can be unscrewed until it is against the cylinder block. Free lock nut and the cylinder is stressed, so that the oil pump can be removed, which is especially suitable for the continuous and test operation of the truss and truss.

Super high-pressure small hydraulic piston cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over and can be extended with a tough pillow or steel plate at the bottom of the super high-pressure small hydraulic piston cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

The China center hole hydraulic jack is usually used to the construction of bridge and buildings, railway and subway, water conservancy and hydropower engineering and China center hole hydraulic jack is suitable for the tension of group anchors with 1860-2000 sizes, Φ15.24, Φ12.7 strands.

The load return high tonnage lock nut hydraulic lifting cylinder combines with the functions of other jacks. The safety of the load return high tonnage lock nut hydraulic lifting cylinder is suitable for the long-term extension of the piston to support the load. The load return high tonnage lock nut hydraulic lifting cylinder maintains mechanical load for long periods of time. Available in low-profile, lightweight or high-tonnage models with capacities ranging from 20 to 1000 tons and stroke lengths from 45 mm to 300 mm.

Double acting steel hydraulic cylinder for press is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the double acting steel hydraulic cylinder for press to ensure sealing performance and extend service life. We will recommend different double acting steel hydraulic cylinder for press for customers according tonnage, stroke and application.

100 ton single acting Ultra-thin hydraulic press cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the 100 ton single acting Ultra-thin hydraulic press cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

First, 200t high tonnage single acting standard cylinder hydraulic description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 200t high tonnage single acting standard cylinder hydraulic: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

Double-acting electric hydraulic jack used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a double-acting electric hydraulic jack has been widely used in foundation settlement tests and static piles.