Large double acting high tonnage hollow hydraulic jack

Lead is a 500 ton double acting hydraulic lift cylinders supplier. When jacking work, find the focus point of the heavy object, adhere to the balance of the weight, and prevent the heavy object from falling slantingly during the lifting operation. Only by locating the focus point can the heavy object be lifted smoothly and safely. After the 500 ton double acting hydraulic lift cylinders completes the lifting operation, other solid objects should be used for support, not only the jack support, to prevent damage to the jack.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300 ton cheap double acting high tonnage hydraulic cylinder jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 300 ton cheap double acting high tonnage hydraulic cylinder jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Leadcrete brand high quality 250 ton double acting hydraulic jack and electric oil pump for sale to Russian. The tonnage of this high quality 250 ton double acting hydraulic jack is 250 tons with 500mm stoke. If you want to know more high quality 250 ton double acting hydraulic jackinformation, please contact us!

Wholesale low price double acting hydraulic jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, if you want to know wholesale low price double acting hydraulic jack price, welcome to contact!

The carrying capacity of the single acting 300 ton low profile hydraulic jack with locking collar should be greater than 1.2 times the gravity of the weight; the minimum height of the single acting 300 ton low profile hydraulic jack with locking collar is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the single acting 100 ton low profile hydraulic jack with locking collar is greater than the sum of the ties and the occipital deformation.

The carrying capacity of the 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the 200 ton double acting hollow hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 200 ton double acting hollow hydraulic jack is greater than the sum of the ties and the occipital deformation.

The prestressing concrete jack prestressed equipment manufacture in China is mainly used for the overall pulling force of the group anchor. The jack is easy to operate, reliable and saves steel strands than other types of jacks. Prestressing concrete jack prestressed equipment is mainly used for bridge construction and other projects that use products such as anchor bolts and tensile equipment.

Double acting high tonnage hydraulic jacks can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.

The double acting hollow plunger hydraulic jack for lifting can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The double acting hollow plunger hydraulic jack for lifting is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof jacks safer and last longer.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of hydraulic jack, electric pump for 30 years. 500 ton double acting high tonnage hollow hydraulic jack is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 500 ton double acting high tonnage hollow hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Lead Equipment Co., Ltd is a professional manufacturer of double-acting push-pull hydraulic cylinders with power packs in China. We could make kinds of standard and non-standard hydraulic jacks with oil pumps. The following is our double acting push pull hydraulic cylinder with a power pack, they are sent to Greece. If you want to know more double-acting push-pull hydraulic cylinder information, please contact us!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 700 bar high pressure double acting solid 350 ton hydraulic ram jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 700 bar high pressure double acting solid 350 ton hydraulic ram jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 400tons stroke 300mm double acting hydraulic jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 400tons stroke 300mm double acting hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

300ton single acting hollow plunger hydraulic cylinder description: The 300ton single acting hollow plunger hydraulic cylinder with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

China factory double acting electric hydraulic jack price and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the China factory double acting electric hydraulic jack reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel. If you want to know more China factory double acting electric hydraulic jack price,please contact us!

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

500mm stroke long stroke double acting hydraulic cylinder used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500mm stroke long stroke double acting hydraulic cylinder has been widely used in foundation settlement tests and static piles.

Our low price double acting heavy duty hollow hydraulic jack own have the follow advantages, it is accepted by many different customers. Low price double acting heavy duty hollow hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The carrying capacity of the 400-ton double-acting high tonnage long stroke hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 400-ton double-acting high tonnage long stroke hydraulic cylinder should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 400 ton double acting high tonnage long stroke hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

Our post tension mono jack for railway jacking system should be equipped a YBZ2-2-50A electric power pack. YBZ series of power pack is a kind of plunger electric high pressure power pack, its rated pressure is 50Mpa, the power is 3kw. Its main function is supply power for hydraulic jack, button heading machine, hydraulic extruder, embossing machine and other hydraulic device.

Double-acting large tonnage hydraulic jack cylinder own have the following advantages, it is accepted by many different customers. 700 Bar double acting large tonnage hydraulic jack cylinder is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

700 bar steel double acting 300 ton hydraulic hollow jack combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 700 bar steel double acting 300 ton hydraulic hollow jack has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

Double-acting electric hydraulic jack used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a double-acting electric hydraulic jack has been widely used in foundation settlement tests and static piles.

Leadcrete Company produces 600 ton double acting hydraulic cylinder used for dump truck parts. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 600 ton double acting hydraulic cylinder used for dump truck parts has been widely used in foundation settlement tests and static piles.

Double-acting hydraulic cylinder and electric oil pump for sale to Russia. The tonnage of this hydraulic jack is 200 tons with a 200mm stroke. If you want to know more double-acting hydraulic cylinder information, please contact us!

The attention of 200 ton single acting small high tonnage hydraulic jack for lifting :
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This machine uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

Leadcrete brand 300ton self-lock 75mm stroke hydraulic lifting jack and electric oil pump for sale. The tonnage of this hydraulic jack is 00ton self-lock 75mm. Because our double-acting hydraulic jack own have the follow advantages, it is accepted by many different customers. 300ton self-lock 75mm stroke hydraulic lifting jack is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Leadcrete Company produces double-acting steel press hydraulic cylinders with great prices for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. Double acting steel press hydraulic cylinder with great price is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

The carrying capacity of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.