United ipinle (English)
Home » Peristaltic Hose Pump » Industrial peristaltic pump head for pumping concrete

Industrial peristaltic pump head for pumping concrete

Industrial peristaltic pump head for pumping concrete is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Rated 4.5/5 based on 595 customer reviews
Share:
Content
Industrial peristaltic pump head for pumping concrete is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.
hose pump rubber hose pump
hose pump rubber hose pump
Precautions before starting
1. Please ensure that the ambient temperature during the operation of the pump is not higher than 45 °C;
2. Ensure that the space where the pump is located is well ventilated, and it is convenient to discharge the heat generated by the pump and the transmission. Keep a certain distance between the motor vent cover and the wall to facilitate the cooling of the motor;
3. Ensure that there is enough space around the pump to facilitate the necessary maintenance;
4. Connect the power line, check whether the power supply, motor, and electric control box are leaking, loose, or short-circuited. Is the insulation performance meet the requirements? After installation, check whether the connection and connection of each component are tightly fastened, and the gear unit is lubricated. Whether the oil (recommended with N220 or N320 medium load industrial gear oil) is sufficient, and whether there is lubricating fluid in the pump casing;
5. After installation, clean the pipeline. It can be cleaned by pumping the cleaning solution. If the cleanliness is required, the sponge ball can be used. Insert the sponge ball into the suction port, and then pump the cleaning solution until the sponge ball comes out from the discharge port, and it can be repeated several times;
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Peristaltic Hose Pump