Industrial hose pump for starch wastewater treatment

No seals industrial peristaltic pump for pumping refractory materials is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

According to the structure of the multifunction hose type concrete spraying pump for sale from china suppliers, the pump is divided into: vertical pump and horizontal pump; according to the sealed form, it is divided into: open pump, semi-sealed pump, and fully sealed pump.

Peristaltic dosing pump popular used in Malaysia factory is a kind of peristaltic pump. An elastomeric tube is squeezed along a length by rollers. The tube’s restitution after squeezing produces a vacuum that draws fluid continuously into the tube. That doesn’t cause any damage to the product. And contaminations are avoided.

Peristaltic Pump Pump hose, rotor, roller, idle rollers, squeeze hose, and driving unit are the most common components of a High Progress Low Noise Water Pump. In the pump house, the squeezing hose is U-shaped, and as the rotor pushes the roller to rotate, the hose is distorted. The distorted hose regains its elasticity once the roller rotates. Thus, negative pressure is formed in this hose, sucking slurry and discharging via outlet under roller’s push, resulting in slurry conveying under pressure.

Squeeze hose for hose pump has a long service life and a wide range of applications; its structure is a high-strength synthetic fiber braided layer reinforced by one or more layers. The inner and outer linings of the squeeze hose are extruded, and the inner lining is made of A range of compound rubbers. The tube body is soft, full of high-strength elasticity, and has good wear resistance. Synthetic fibers are added to the pipe body to enhance the overall performance of the pipe body, low heat generation during use, good recovery, and durability. The hose has good resistance to positive and negative pressure and has good acid, alkali, oil high temperature, and other characteristics. It can transport more than 90% of today’s chemicals. The main components are natural rubber (resistance to general weak acids and alcohol), nitrile rubber (resistance to grease, alkali metals, and detergents, etc.), and EPDM rubber (suitable for ketones, alcohols, and concentrated acids), etc.

China Easy Operate Hose Squeeze Pump With Best Price could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Customized hose pumps for pumping oil base mud can be used for pumping oil sludge, heavy fuel oil sludge, and can be used as a sludge pumps & high pressure slurry transfer pumps.

Big flow rate self-priming industrial peristaltic pump consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Good Quality Easy Operate Squeeze Peristaltic Pump For Pumping Bentonite In Tbm Project is used for pumping sludge materials, no contact between product and mechanical parts, only squeese hose to replace. Good Quality Easy Operate Squeeze Peristaltic Pump For Pumping Bentonite In Tbm Project could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Easy operate peristaltic pump for pumping mortar is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Industrial hose pump for starch wastewater treatment can be used for liquid and thick slurry transportation, such as: thick ore slurry, sewage, construction industry
Chemical industry, animal husbandry, fertilizer, laboratory liquid, petroleum industry, ceramic industry, paper industry, cosmetics, electroplating industry, food industry, pharmaceutical industry and other liquids with high sealing requirements, high viscosity, and high particle content, thick slurry transportation .

Concrete slurry transfer peristaltic pump for sale is used mainly for concrete slurry. An elastomeric tube is squeezed along a length by rollers that push the fluid contained within. The tube’s restitution after squeezing produces a vacuum that draws fluid continuously into the tube. This creates a gentle pumping action that doesn’t cause any damage to the product. Contaminations are avoided because the fluid is contained within the tube. The hose pump employs a rotor with rollers mounted on it that continually compress and occlude some portion of the tube. This action moves the fluid through the tube with a constant rate of displacement for each revolution of the rotor, enabling a precise measurement of the volume of fluid pumped through the tube.

Full Sealed Hose Squeeze Pump For Light Weight Concrete is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Heavy-duty abrasion resistance industry hose pump is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

Peristaltic Pump For Pumping Water Plus Sediment are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Peristaltic squeeze pump for conveying concrete and mortar are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Small slurry pump liquid hose pump for sale can be used for pumping oil sludge, heavy fuel oil sludge, and can be used as a sludge pumps & high pressure slurry transfer pumps.

China manufacturer LH15-200 small flowrate peristaltic dosing pumps for Bengal is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Easy operation hose concrete pump uses high pressure, resisting wear squeeze hose with steel wire reinforcement layers, the working pressure is up to 25 bars, and max. capacity could arrive to 40m3/h.

Heavy-duty concrete peristaltic hose pump full sealed hose squeeze pump for industrial has wide application fields, such as building construction, pharmaceutical, textile, dye factory, water treatment plants, paper printing, food, mining, glass ceramic enterprises breweries, foundation/underground engineering, petrochemical industry, animal husbandry and aquaculture and other industries.

For TBM project, the industrial high pressure hose pump for bentonite grout can be used for pumping bentonite and mud fluid. Because the tube is only spare part, easy to maintain, and saving cost, the industrial high pressure hose pump for bentonite grout get better feedback from customers.

Best Price Peristaltic Pump For Tunnel Construction is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

High viscosity with ce iso peristaltic pump is nice quality, having a competitive price, get better feedback from customers.

Factory price peristaltic pump head with hopper is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

The working principle of the Squeeze hose peristaltic pump is based on the alternate expansion and contraction of the elastic squeeze hose to transport substances, and its operation is as simple as our throat and esophagus. The squeeze hose with smooth inner wall and reliable strength is installed inside the pump body, and is rotated and squeezed by two protrusions on the turntable. This kind of rotation makes the medium transport in one direction without backflow, which can make the pump applied to the occasion of precise metering, and the pressure can reach 16Bar / 230psi. The shape recovery of the squeeze hose after conveying the medium can generate a full vacuum in the pipe to suck the medium into the pipe, so the use of the squeeze hose peristaltic pump can convey extremely viscous media without problems. Fill the lower part of the pump body with a specially designed lubricating oil grade to lubricate the squeeze hose and reduce the temperature so that the squeeze hose has a longer service life. Since the medium only contacts the squeeze hose for peristaltic pump and does not contact any other parts, the squeeze hose peristaltic pump is very suitable for conveying abrasive and high-viscosity media.

Industrial hose squeeze pump had been used by China Railway Engineering Equipment Group and another TBM manufacturer. Our industrial hose squeeze pump used for TBM works very well and steady.

Industrial peristaltic pump head for pumping concrete is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Electric peristaltic pump for mining is mainly used for pump materials through two roller or pressure shoe rotating clockwise squeezing hose. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under rollers’ push, finally forms pressure conveying of slurries.

High Flow Hose Squeeze Pumps For Ceramic are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Squeeze pump for conveying concrete and mortar is used for pumping sludge materials, no contact between product and mechanical parts, only squeese hose to replace. Big capacity peristaltic pump for hydrocarbon sludge could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc. Customers could change the suitable material squeeze hose depend on pumping material properties.