Industrial Hose Peristaltic Pump For Pumping Foam Concrete

High Performance Hose Pump For Oil Base Mud usually consists mainly of pump hose, rotor, roller, idle rollers, squeeze hose and driving unit etc. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure is this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

The squeeze hose for a grout pump is a consumable part applied to industrial peristaltic pumps, widely used to transfer and convey mortar, concrete, or foamed concrete. The part is manufactured in polyurethane, which is characterized by reliability, super quality, elasticity, and long duration. The inner rubber layer of different materials is used inside the hose, and the multi-layer cloth or cord is used as the reinforcement layer. The outer rubber layer depends on the purpose of the hose and has good anti-friction performance.

Selecting the correct Trelleborg squeeze hose type and material is the most critical aspect of the correct application of a peristaltic pump. The Trelleborg squeeze hose must be of the correct material for the fit to avoid premature wear on the squeeze which could cause the hose to leak, normally the hose can be replaced when it wears out.
Trelleborg squeeze hose structure and features: the inner lining and outer lining of the hose are made of high extrusion-resistant composite rubber, and the structure is wound with one or more layers of high-strength synthetic fibers according to different customer pressure and outer diameter requirements. The tube body is soft, with strong elasticity, wear resistance and pressure resistance. Trelleborg squeeze hose has good cycle recovery performance, long service life and durability during use.

Squeeze Type Industrial Hose Peristaltic Pump For Pumping Foam Concrete consists mainly of pump house, rotor, roller, idle roller, squeeze tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

LH15-200 industrial dosing squeeze hose pump is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

LH100-915 high pressure peristaltic pump for sale adopts special process squeeze hose, working pressure could be up to 26bar, output is 30m3/h, Max. Aggregate Size is 15mm. If you are interested in LH100-915 high pressure peristaltic pump, please contact us freely, sales1@leadcrete.com.

Construction used peristaltic pump series is a new type of multi-function and multi-function industrial pump developed by absorbing advanced technology. The pump has no seal, no leakage, strong self-priming ability, simple structure and convenient operation and maintenance. Peristaltic pump is suitable for conveying a variety of abrasive fluid materials, viscosity, density, corrosive. It can be used in petroleum, medicine, papermaking, ceramics, chemical, water treatment, mining, gold smelting and other industries.

Peristaltic pump for tunnel is suitable for pumping bentonite, foamed concrete, mud, mortar and other viscous liquids up to 26 bar pressure in underground tunnels. The peristaltic pump has strong power and stable performance, and is widely used in downholes. Large-scale underground construction such as tunnel/ TBM/ subway.

Easy maintenance squeeze industrial peristaltic pump are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Ce Iso Durable Industrial Hose Squeeze Pumps With Adjustable Flow Rate is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. Ce Iso Durable Industrial Hose Squeeze Pumps could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Various Output Industrial Hose Squeeze Pump are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Squeeze hose pipe, also known as peristaltic pump tubing, is a type of hose used in peristaltic pumps. They are usually made of materials such as silicone rubber, natural rubber or thermoplastic elastomers and are used in a variety of different pumping applications.

This type slurry transfer peristaltic hose pump was specially designed for the pumping oil sludge and slurries. Because oil sludge and slurries includes Oil, water, organic clay and oil soluble chemical treatment agent in it. With high temperature and high viscosity, very hard to pumping. We according to this features, Afresh design the structure and choose NBR hose for the peristaltic hose pump. After applied,  workers are very satisfied with our peristaltic hose pump.

oem supplier industrial hose squeeze electric peristaltic pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Low Price Dosing Squeeze Hose Pump For Pumping Mortar is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace, etc.

Adjustable Industrial Peristaltic Pump For Concrete is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Concrete Slurry Transfer Peristaltic Hose Pump is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for axample, construction, pharmacy, textile mill, dye making, water treatment, papermaking, mining, ceramic, brewery, beverage and TBM project.

Peristaltic pump hoses are a type of peristaltic hose that is used specifically in peristaltic pumps. These pumps work by squeezing the hose between a rotating compression shoe and a fixed surface, creating a vacuum that draws the fluid into the hose, and then forcing the fluid downstream by the action of the compression shoe.

Peristaltic pump for hydrocarbon sludge pumping is mainly used for pump materials through two roller or pressure shoe rotating clockwise squeezing hose. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under rollers’ push, finally forms pressure conveying of slurries.

According to the structure of the multifunction hose type concrete spraying pump for sale from china suppliers, the pump is divided into: vertical pump and horizontal pump; according to the sealed form, it is divided into: open pump, semi-sealed pump, and fully sealed pump.

Oem Supplier Iso And Ce Certificate Squeeze Hose Peristaltic Pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Peristaltic pumps can be used for aggressive medium used in chemical manufacturing, thanks to the unique structure of the peristaltic pump.

Industrial peristaltic hose squeeze pump for mortar is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

High flow hose squeeze pump in Russia
LH industrial hose squeeze pump output of different models vary from 0.01-50m3/h which can be used for different applications. The industrial hose pump output vary from the hose ID, rotary diameter, rotation…
We customized high flow hose squeeze pump in Russia, the customer was very satisfied.

Nowadays, one Taiwan customer order our hose pump for water treatment project. Considering that customer want to adjust freely the output capacity, we add the ABB frequency converter and electric control box for hose pump.

China Peristaltic Pump Popular Used In Malaysia could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Hose concrete pump for sale is designed based on the hose pump, the hose concrete pump for sale uses high pressure, wear resisting extruded tubes.

Multifunction hose type concrete spraying pump with hopper from China suppliers is a new, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Recently, we deliver hose pump exported to Singapore customer for pumping cement and mortar. The customer has received the hose pump and gave a high evaluation.

High-pressure steel wire concrete hose pipe is mainly composed of inner rubber layer, middle rubber layer, 2, 4, 6 layers of steel wire wound reinforcement layer and outer rubber layer. The inner rubber layer has the function of maintaining the pressure of the conveying medium and protecting the steel wire from erosion. The outer layer protects the steel wire from damage, and the steel wire layer (φ0.3–2.0 reinforced wire) layer is the reinforcement of the skeleton material.