Hose Type Peristaltic Pump For Pumping Foam Lightweight Concrete

Squeeze hose pipe consists primarily of an inner rubber layer, middle rubber layer, 2, 4, or 6 layers of steel wire reinforcement, and an outer rubber layer. The inner rubber layer has the function of maintaining the conveyed medium under pressure and protecting the steel wire from corrosion. The outer layer protects the steel wire from damage, while the layer(s) of steel wire (φ0.3-2.0 reinforcing wire) serves as the strengthening effect of the skeleton material.

Peristaltic pump high flow is new type, multi-function industrial hose pump. Peristaltic pump high flow is completely out of the traditional pump impeller and shaft seal operation mode, pumping viscosity, corrosive large, fluid impurities of the medium transport has great advantages, and compared with traditional pump, perstaltic pump has a different principle and a wide range of applications.

Peristaltic hose pump used for mining industry has a life span of 7-10 years. The biggest challenge lies in the hose of the hose pump, which is the core component of the hose pump, and its life is directly related to the cost of the pump. It can be said that the hose pump is designed to maximize hose life.

Low Price Dosing Squeeze Hose Pump For Pumping Mortar is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace, etc.

LCP15H-D diesel hose type concrete pump was designed based on the squeeze hose pump, the concrete pump uses high pressure, wear resisting extruded tubes. Diesel hose type concrete pump was widely used for masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.

Durable industrial peristaltic pumps for pumping foam lightweight concrete is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc.

Heavy-duty Abrasion Resistance Industries Hose Pump could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

No seals industrial peristaltic pump for pumping refractory materials is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Electric peristaltic pump for mining is mainly used for pump materials through two roller or pressure shoe rotating clockwise squeezing hose. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under rollers’ push, finally forms pressure conveying of slurries.

The squeeze hose for a grout pump is a consumable part applied to industrial peristaltic pumps, widely used to transfer and convey mortar, concrete, or foamed concrete. The part is manufactured in polyurethane, which is characterized by reliability, super quality, elasticity, and long duration. The inner rubber layer of different materials is used inside the hose, and the multi-layer cloth or cord is used as the reinforcement layer. The outer rubber layer depends on the purpose of the hose and has good anti-friction performance.

Philippines Industrial Hose Pump is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Compared with other type pump, hose pump have much outstanding features, such as: no seals, no valve, dry -running without damage, reversible, only squeeze hose to replace, easy to operate and maintain.

peristaltic hoses can be used in a wide range of sizes and can be customized according to your needs. It is used in hose pumps to pump water, mortar, cement, concrete, bentonite, foamed concrete, pigment, sewage, etc

Industrial Hose Squeeze Pump for Waste Water Applicable Scenarios:
In wastewater treatment, industrial hose squeeze pumps are often used in the following scenarios:
Wastewater transmission: used to transfer wastewater from one place to another, especially when a large amount of wastewater needs to be treated, the pump can provide stable and continuous fluid transmission.
Sludge treatment: Sludge is often produced during wastewater treatment. Industrial hose squeeze pumps can treat sludge containing solid particles and transport it to designated treatment equipment.
Chemical dosing: In the process of wastewater treatment, chemicals are sometimes needed to change the properties of wastewater or remove pollutants. Industrial hose squeeze pumps can accurately control the amount of chemicals added to ensure the effect of wastewater treatment.

Industrial Hose Squeeze Pump for Waste WaterMain features
No pollution: The fluid only contacts the hose, not the pump body, avoiding the contamination of the pump body to the fluid.
High precision: It can accurately control the flow and pressure of the fluid to meet the precise control requirements in the wastewater treatment process.
Low shear force: The shear force on the fluid is small, suitable for conveying shear-sensitive or highly corrosive fluids.
Good sealing: As the only sealing part, the hose can provide a good sealing effect to prevent fluid leakage.
Easy maintenance: The hose is the only vulnerable part of the pump, which is easy to replace and has low maintenance cost.

Peristaltic hose pump can be used for pumping oily slurry, heavy fuel oil sludge, and can be used as a sludge pumps & high pressure slurry transfer pumps.

Usually, in order to recommend suitable peristaltic pump for foam concrete pumping, working pressure and output capacity need be provided from customers’ working site. Considering that the voltage is different with ours, suitable voltage motor could be customize for customers. If electric power supply is not convenient, we could also provide diesel engine drive peristaltic pump.

Squeeze hose pump is very ideal for pumping foam concrete, it will not damage foam concrete feature. Compared with other kind pump, squeeze hose pump no seals, no valve, dry-running without damage, reversible and only squeeze hose is the only replace part.

High Precision Liquid Transfer Peristaltic Pumps have been used in industry for many years. The original design of the hose pump can even be traced back to more than half a century ago. Hose pumps were first used by firefighters in the U.S. state of Connecticut to transport lime slurry.

High flow hose peristaltic pump in Russia is widely applied in industry project, such as chemical industry, papermaking, printing and dyeing, food and construction engineering, etc. Usually only squeeze hose into contact with the material, high flow hose peristaltic pump in Russia could change different squeeze hose accord to characteristics of pumping materials.

Factory price peristaltic pump for underground constructure consists mainly of pump house, rotor, roller, idle roller, squeeze hose and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus th e negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

Factory Price Industrial Peristaltic Pump For Thailand is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Big flow rate self-priming industrial peristaltic pump consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Positive displacement self-priming metering squeeze hose peristaltic pump is more and more widely used in gold smelting, nonferrous metallurgy, chemicals, mining, food processing, brewing, ceramics, water treatment and other industries.

Good Quality Hose Pump For Oil Base Mud are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Dye Making Used Peristaltic Metering Pump could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Industrial peristaltic pump in Vietnam can be used in following field: Construction, pharmacy, textile mill, dye making, water treatment, paper making, mining, ceramic, brewery and beverage, underground engineering, etc. Industrial peristaltic pump in Vietnams is perfect to pump corrosive, abrasives, shear sensitive fluids, high viscosity fluids, high density fluids, large solids, metering(±1%), high pressure(3Mpa).

The peristaltic pump is the most suitable pump for pumping sulfuric acid. The most important consideration for pumping sulfuric acid is to protect the safety of surrounding workers by preventing the direct exposure of the fluid or the evaporation of the fluid. The unique structure of the peristaltic pump can perfectly avoid this risk.

Popular Multifunction Hose Peristaltic Pump For Pumping Mortar is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Industrial Hose Peristaltic Pump For Pumping Foam Concrete is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, papermaking and other industries.

Short Down Time Variable Speed Rotary Peristaltic Pump For Sale In Philippine are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.