High quality 250 ton double acting hydraulic jack

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

Double-acting electric hydraulic jack used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a double-acting electric hydraulic jack has been widely used in foundation settlement tests and static piles.

Our flange hydraulic cylinders own have the follow advantages, it is accepted by many different customers. Flange hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 250 ton steel double acting hydraulic cylinders, electric pump for 30 years. 250 ton steel double acting hydraulic cylinders are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of double acting hydraulic jack price, electric pump for 30 years. Double acting hydraulic jack is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, double acting hydraulic jack price have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The carrying capacity of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

First, 350ton spring return single acting hydraulic cylinder description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 350ton spring return single acting hydraulic cylinder with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

Lead is a 500 ton double acting hydraulic lift cylinders supplier. When jacking work, find the focus point of the heavy object, adhere to the balance of the weight, and prevent the heavy object from falling slantingly during the lifting operation. Only by locating the focus point can the heavy object be lifted smoothly and safely. After the 500 ton double acting hydraulic lift cylinders completes the lifting operation, other solid objects should be used for support, not only the jack support, to prevent damage to the jack.

Leadcrete Company produces 100 ton double acting steel hydraulic jack for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 100 ton double acting steel hydraulic jack has been widely used in foundation settlement tests and static piles.

Double-acting hydraulic cylinder and electric pump must be on a sturdy surface so that the double-acting hydraulic cylinder can withstand the load, the load must be placed in the center, covering all pistons, and can only load stationary objects.

750t capacity double acting hydraulic cylinder and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the 750t capacity double acting hydraulic cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Leadcrete is a professional high pressure China hydraulic post-tensioning jack supplier in the design, production, sale and service of hydraulic jack. If you want to know more China hydraulic post-tensioning jack price and information, please contact us!

200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

Double acting hydraulic piston cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more double acting hydraulic piston cylinder information, please contact us!

In the word, the YDC series post tension stressing equipment jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension stressing equipment jack, pls contact us freely.

Lead Equipment as a hot sale double acting lifting jack for synchronous lifting pushing supplier, we not only supply hot sale double acting lifting jack for synchronous lifting pushing, but also supply double acting hydraulic cylinder, electric oil pump, hydraulic hand pump and other related hydraulic tool. Because the type hot sale double acting lifting jack for synchronous lifting pushing is not standard, we could accept to customize kinds of different tonnage and stroke lifting hydraulic cylinder.

The attention of 200 ton single acting small high tonnage hydraulic jack for lifting :
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This machine uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

The application of 300ton double acting steel hydraulic piston cylinder Made In China:
1. If the oil quantity of the pump body is insufficient, it is necessary to first add working oil (10# oil) to the pump to work.
2, estimated weight, should not be overloaded.
3. Determine the center of gravity of the lifting object and select the point of gravity of the jack. At the same time, it must take into account whether the softness and hardness of the ground are padded with tough wood to avoid the risk of dumping when lifting.
4. After the jack lifts the heavy object, the heavy material should be supported in time with the tough wood. It is forbidden to use the jack as a support. It is forbidden to use several jacks at the same time to avoid the imbalance of load and the danger of dumping.
5. When using, first connect the quick joint of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the cylinder.
6. Please refer to the instruction manual for the electric pump.

We have many types of double acting piston hydraulic lifting jack for synchronous lifting pushing: thin jacks, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–lead company professional planning to build. Different types of double acting piston hydraulic lifting jack for synchronous lifting pushing use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

China top hydraulic jack supplier, supply full complete set of 5-2000 ton single-acting pancake self-locking type hydraulic jack, double acting hydraulic jack, hollow hydraulic jack, flange hydraulic jack, lock nut hydraulic jack, electric oil pump, prestressed hydraulic jack, mono strand jack and other equipments.
As per clients’ demand, we can customize different single-acting pancake self-locking type hydraulic jack. If you want standard or non-standard single-acting pancake self-locking type hydraulic jack or electric pump station, welcome to send inquiry to us, thanks so much.

Leadcrete Company produces qyc mono strand jack for sale. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, qyc mono strand jack for sale has been widely used in foundation settlement tests and static piles.

Factory-price double-acting steel hydraulic cylinders can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more about factory price double-acting steel hydraulic cylinder information, please contact us!

Double acting high tonnage hydraulic jacks can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.

Leadcrete is a professional high pressure 10000psi single acting hydraulic jack for pulling supplier in the design, production, sale and service of hydraulic jack.

Lead Equipment Co., Ltd is a professional manufacturer of 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack in China. We could make kinds of standard and non-standard 700bar double acting 500 ton low profile hydraulic lifting ram jack with oil pump. The following is our 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack, they are sent to Greece.

QYC single strand mono stressing jack, after proving its structure, it is more convenient, light and new design jack. QYC single strand mono stressing jack has compact structure, perfect seal performance, light weight, small dimension and many other features. QYC single strand mono stressing jack is widely used for front tension and post tension prestressing PC strands, and if it is equipped work anchor and wedges, it also could be used for tensioning prestressing multi-strands anchor and wedges.

Super high-pressure small hydraulic piston cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over and can be extended with a tough pillow or steel plate at the bottom of the super high-pressure small hydraulic piston cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Gaodetec is a professional high pressure 700 bar single acting super low height hydraulic lifting jack supplier in the design, production, sale and service of hydraulic jack. If you want to know more high pressure 700 bar single acting super low height hydraulic lifting jack price, please contact us!

The post tension jack for post tensioning tension equipment are used pre-stress steel wire and bridge pulling. The post tension jack for post tensioning tension equipment need match oil pump use, the power of the tension and the lift is provided by the high pressure oil at the tension pump.

300-ton double-acting hollow hydraulic jack combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 300-ton double-acting hollow hydraulic jack has a through a hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.