High capacity 45mm stroke single acting pancake lock nut hydraulic jack

When the 700-ton hydraulic ram is lifting, it is necessary to select a hydraulic jack suitable for tonnage:
The carrying capacity of the 700-ton hydraulic ram should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700-ton hydraulic ram should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 500 ton double acting hydraulic lift cylinders for sale, electric pump for 30 years. 500 ton double acting hydraulic lift cylinders for sale are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The double-acting 200ton hollow plunger hydraulic cylinder/jack/ram should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double-acting 200ton hollow plunger hydraulic cylinder/jack/ram. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Single-acting hydraulic jack and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, and can only load stationary objects. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use it! When the single acting hydraulic jack reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Highly cost effective double acting high tonnage hydraulic cylinder jack for sale can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. So what are the precautions for the use of highly cost effective double acting high tonnage hydraulic cylinder jack for sale?

The application of 300ton double acting steel hydraulic piston cylinder Made In China:
1. If the oil quantity of the pump body is insufficient, it is necessary to first add working oil (10# oil) to the pump to work.
2, estimated weight, should not be overloaded.
3. Determine the center of gravity of the lifting object and select the point of gravity of the jack. At the same time, it must take into account whether the softness and hardness of the ground are padded with tough wood to avoid the risk of dumping when lifting.
4. After the jack lifts the heavy object, the heavy material should be supported in time with the tough wood. It is forbidden to use the jack as a support. It is forbidden to use several jacks at the same time to avoid the imbalance of load and the danger of dumping.
5. When using, first connect the quick joint of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the cylinder.
6. Please refer to the instruction manual for the electric pump.

First, 150 ton high technical support single acting high tonnage hydraulic jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 150 ton high technical support single acting high tonnage hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

The carrying capacity of the 200Ton single acting low height lock nut hydraulic cylindershould be greater than 1.2 times the gravity of the weight; the minimum height of the 200Ton single acting low height lock nut hydraulic cylinder is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

200 ton hydraulic return double acting high tonnage hydraulic cylinders own have the follow advantages, it is accepted by many different customers. 200 ton hydraulic return double acting high tonnage hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The factory price synchronous hydraulic jack cylinders is mainly used for lifting heavy object. If you tell me your tonnage, stroke, center hole and outer diameter, etc. We can make factory price synchronous hydraulic jack cylinders according to your detail requirement. If you want to know more factory price synchronous hydraulic jack cylinders information,please contact us!

This electric single action hydraulic jack for sale can directly conduct pressure test on the pressure vessel, equipped with special tools for lifting, bending, straightening, extrusion, shearing, riveting, jacking, stretching, disassembly, punching, construction steel bar extrusion, Various operations such as bridges and construction machinery. If you want to know more electric single action hydraulic jack for sale, please contact us!

Leadcrete brand high quality single acting steel hydraulic cylinder price and electric oil pump for sale to. The tonnage of this hydraulic jack is 300 tons with 500mm stoke. Because our high quality single acting steel hydraulic cylinder price own have the follow advantages, it is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The best price multi strand post tension bridge prestressing hydraulic prestress machine jack is easy to use, but special attention should be paid to the hydraulic cylinder during use. If the best price multi strand post tension bridge prestressing hydraulic prestress machine jack fails and needs to be repaired or replaced before it can continue to be used, it will greatly reduce work efficiency and increase costs.

500T 1000mm stroke double acting hydraulic oil cylinder for special projects and electric oil pump for sale to Russian. The tonnage of this hydraulic jack is 500 tons with 1000mm stoke. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. According to customer’s requirement, we add a 80mm thickness round flange for this 500T 1000mm stroke double acting hydraulic oil cylinder for special projects. This flange is with thread in the wall, it could be dismountable. It is very convenient for customers.

If multiple 200 ton double acting hydraulic hollow ram are used to lift the same equipment, the same type of 200 ton double acting hydraulic hollow ram should be used, and the sum of the additional lifting weight of each 200 ton double acting hydraulic hollow ram should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Leadcrete Company produces hydraulic jacks for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. 500 ton double acting hydraulic cylinder for sale is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500 ton double acting hydraulic cylinder for sale has been widely used in foundation settlement tests and static piles.

The attention of 200 ton single acting small high tonnage hydraulic jack for lifting :
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This machine uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

Leadcrete Company produces 100 ton double acting steel hydraulic jack for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 100 ton double acting steel hydraulic jack has been widely used in foundation settlement tests and static piles.

In the word, the YDC series post tension electric stressing mono tension jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension electric stressing mono tension jack prices, pls contact us freely.

Hydraulic cylinder double acting with flange , as industrial maintenance and installation tools that are widely used in the industry, different from the mechanical tools used in our homes, especially in the way they are maintained. If you want to know more hydraulic cylinder double acting with flange information, please contact us!

Leadcrete Company produces double-acting steel press hydraulic cylinders with great prices for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. Double acting steel press hydraulic cylinder with great price is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

The double acting hollow plunger hydraulic jack for lifting can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The double acting hollow plunger hydraulic jack for lifting is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof jacks safer and last longer.

Lead Equipment as a single acting hollow synchronous hydraulic jack cylinders supplier, we not only supply single acting hollow synchronous hydraulic jack cylinders, but also supply double acting hydraulic cylinder, electric oil pump, hydraulic hand pump and other related hydraulic tool. Because the type single acting hollow synchronous hydraulic jack cylinders is not standard, we could accept to customize kinds of different tonnage and stroke lifting hydraulic cylinder.

The manufacturer price single acting hydraulic jack cylinder has a very low closing height and is suitable for limited space. Manufacturer price single acting hydraulic jack cylinder is can be used for highway bridge maintenance, ship diesel engine maintenance adjustment, power plant wind power equipment maintenance adjustment and other synchronous lifting instead of rubber bearings.

The carrying capacity of the Single acting high tonnage lock nut hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the Single acting high tonnage lock nut hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

Super high-pressure small hydraulic piston cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over and can be extended with a tough pillow or steel plate at the bottom of the super high-pressure small hydraulic piston cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Product line of single acting low height lock nut hydraulic jack as follow: industrial tools, lock nuts provide reliable mechanical load retention, low friction locking ring for easy rotation, saving time and effort, designed to withstand 10% lateral load and withstand up to 90% of maximum stroke, hardened surface resists lateral loads and periodic wear. The overflow port acts as a stroke limiter to prevent the plunger from bursting, both inside and outside are protected by weather, replaceable bearings enclose the plunger to provide support throughout the stroke; certified lifting lugs and base mounting holes. If you want to know more single acting low height lock nut hydraulic jack information, please contact us!

The characteristics 200-ton single-acting steel hollow plunger 700 Bar hydraulic jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High-strength alloy steel is durable.

Double acting heavy duty hydraulic jacks cylinder and electric oil pump for sale to. The tonnage of this hydraulic jack is 630 tons with 500mm stoke. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. Double acting heavy duty hydraulic jacks cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The double acting high pressure big bore hydraulic cylinders should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the double acting high pressure big bore hydraulic cylinders can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the hydraulic jack. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).