United ipinle (English)
Home » Peristaltic Hose Pump » High Abrasion Resistance Hose Pump For Clc Foam Concrete

High Abrasion Resistance Hose Pump For Clc Foam Concrete

High Abrasion Resistance Hose Pump For Clc Foam Concrete is used for pumping sludge materials, no contact between product and mechanical parts, only squeese hose to replace. High Abrasion Resistance Hose Pump For Clc Foam Concrete could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Rated 4.8/5 based on 250 customer reviews
Share:
Content
The working principle of the High Abrasion Resistance Hose Pump For Clc Foam Concrete is that a special rubber hose with a smooth inner wall and strong strength is installed inside the pump body. It is kneaded along the hose through a pair of pressure rollers. This rotation causes the medium to be transported in one direction. After the medium is transported, the elasticity of the squeezed hose and the force of the side guide rollers restore the original. At this moment, a high vacuum is generated in the hose to suck the medium into the lumen again, and the medium will follow it. The pressure roller is kneaded and discharged from the hose. In this way, the medium is continuously sucked and discharged.
wholesale peristaltic pump price
wholesale peristaltic pump price
Features of the High Abrasion Resistance Hose Pump For Clc Foam Concrete:
1. Satisfy the cleaning requirements: the main point of aseptic clean transportation, the liquid only touches the pump tube, not the pump body.
2. Low stress: The fluid is not sheared, but driven by the body. This is the love of shearing.
3. High splitting accuracy: the characteristic of positive displacement, because the pump can output every time it rotates, metering and quantitative splitting, so it can be used.
4. Self-priming operation: The hose peristaltic pump for TBM can be used to transport gas, liquid, and gas-liquid mixture in dry operation, and can transport fluids containing solid particles. The diameter of solid particles is up to 30% of the diameter of the hose. The vacuum generated by the peristaltic pump allows the pump to achieve self-priming, and there is no need to fill the pump with water before starting.
5. Equal flow in the forward and reverse directions: By changing the rotation of the motor, you can switch the forward and reverse directions without liquid supply, and the forward and reverse directions without liquid supply do not flow.
6. Easy to maintain and clean: Only hoses are consumables, without valves and seals, easy to set up and operate, and hoses can be replaced quickly.
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Peristaltic Hose Pump