Grouting equipment and machinery

Leadcrete Equipment Co., ltd. to develop the Cement bentonite grout for sale is divided into two kinds of piston and screw pump works, through which the mix slurry pressure into the prestressed tension of the pore, so as to achieve the purpose of bonding and corrosion

Jet grouting pump, also known as grouting machine or grouting pump, is a device used to inject various grouts such as cement slurry, water glass, clay slurry, polyurethane, accelerators, etc. into media such as foundations, rocks, walls, etc. under high pressure. A 100bar jet grouting pump refers to a grouting pump whose working pressure can reach 100 bar (MPa). This type of pump is usually used in scenarios that require high grouting pressure, such as deep foundation treatment, tunnel reinforcement, slope stability, and other engineering projects.

Electric grout pump is specially used as filling pump together with pipe-jacking system, it could convey thick soil which content water ratio ≥30%. This concrete grouting pumping also could convey concrete in tunnel construction. The pump output is 100L/min, the rated pressure 5Mpa.

If you want to know more information about hand-operation grouting pump supplier in UAE, please email us: sales1@leadcrete.com

Jet grout pump for double fluid system is a special grouting equipment designed specifically for handling dual fluid grouting systems. This pump is capable of simultaneously or separately processing two fluids (usually high-pressure water and solidifying agents such as cement slurry or other chemical slurries), and injecting them into the rock and soil after mixing them evenly during the grouting process.

Of course, if have any question on the grouting equipment and machinery , also please contact us without any hesitation, because we are professional on grouting equipment and machinery, more better solution will be offered to you at first time.

During the drilling rig jet grouting pump construction of the reinforcement process, due to the limitations of the reinforcement process, in some soil conditions will produce slurry and pulp phenomenon, so that the incorporation of cement slurry is not effectively retained in the need to strengthen the area

Leadcrete 6-10l/min cement grouting pumps for sale are available in various sizes and power ratings with grout injection pressures up to 450 bar and flow rates up to 210lt/min. 6-10l/min cement grouting pump for sale easily meet all the main requirements for low, medium and high pressure applications such as micropiling, anchoring injections, permeation grouting,

There are various manual grout pump factories all over the world. In face of so many suppliers, you should pay more attention. What do we need to choose a suitable grout pump and judge a good grout pump supplier?

Hand grouting injection pump for sale can provide power for the cutting tool, the hydraulic compressor, punching machine.

Manual cement grout pump is mainly used for grouting cement mortar or the similar mortar, specialized to spray leakage-proof repair on the small area on the bridge engineering and house construction.

Cement grouting pump is ideal for grouting-process in underground and civil applications. Leadcrete Equipment is cement grouting pump suppliers and manufacturers.

50l/min grouting pump cement slurry is a piston grouting pump, single-cylinder double-acting universal pressure grouting machine, single cylinder double acting universal pressure grouting machine, small volume, light weight, high efficiency obvious advantages.

The high pressure groove pump is integrated inside a standard container, with a compact structure and high integration, making it easy for long-distance transportation and quick on-site installation. High pressure groove pump in container can provide high working pressure, usually up to several hundred bars or more, ensuring that the slurry can penetrate deep into the rock and soil mass, forming an effective reinforcement layer. The flow rate of the grouting pump can be adjusted according to the needs of the project to meet the requirements of different grouting processes. Equipped with advanced automation control system, it can achieve precise control and real-time monitoring of grouting parameters, improve grouting efficiency and construction quality. Due to the use of containerized design, the equipment has good overall mobility and can be easily transferred from one construction site to another.

In most cases, 400l grout mixing machine priceis less expensive to utilize the rock thus strengthened in situ instead of drilling, blasting, excavating, crushing, and mixing it with cement to form a concrete which then is cast to form a support for the excavation.

Hand operated grout pump for sale is mainly used for grouting cement mortar or the similar mortar, specialized to spray leakage-proof repair on the small area on the bridge engineering and house construction.

Chinese factory CE pneumatic piston grouting pump for coal mine can be used in coal mining face.

Cement grout pump in Egypt is our newest product, the machine consists of motor, reducer, pump, air compressor, electrical equipment, machine frame and so on.

Good electric grout pump can improve the bearing capacity of foundation soil, increase soil enclosure wall inside the passive earth pressure, but to increase the ability of soil resistance to lateral deformation is not obvious.

New hydraulic grout cement pump is simple, compact structure, performance is remarkable, the economic and reasonable price.

A one-way hydraulic Hand grout pump supplier is a small hydraulic pump that converts manual mechanical energy into hydraulic energy.

Leadcrete is your global partner for state-of-the-art mixing and injection technology. Wherever building sites, rock, anchorages or tunnel constructions need to be reinforced or sealed, our high pressure grouting pump will at work.

If you have other special requirement on grouting mump for sale, our skilled engineer also could design the grout pump as per your request, please feel free to contact with us, we will supply you a high cost-effective product and good service.

If you have other special requirement on trailer grout pump for sale, our skilled engineer also could design the grout pump as per your request, please feel free to contact with us, we will supply you a high cost-effective product and good service. Email address: sales1@leadcrete.com.

Leadcrete is the Industrial squeeze pump manufacturer in UAE market. And not only just in grouting pump, also grout mixer and agitator, and compact grouting plant stations

Cement injection grouting machine for sale with best price, any need you can send us an email freely, Email addrsess: sales1@leadcrete.com

Grout pump drilling is widely happened during the grouting projects. The purpose and function of foundation pit support as the following:
1.Ensure the stability of soil around the foundation pit, while meeting the requirement of sufficient space in the basement construction. This is necessary for earth excavation and basement construction.

There are various double liquid injection pump suppliers all over the world. In face of so many suppliers, you should pay more attention. What do we need to choose a suitable grout pump and judge a good grout pump supplier?

Waterproof injection grout pump for underground, features include large output flow and pressure, user-friendly adjustable output pressure and volume control, and easy maintenance. Its sturdy, vertical and compact design makes it lightweight and easy to move.

Leadcrete new design grout pump for sale is suitable for grouting water, cement, bentonite and fine cement, non-shrink cement material. As for the drilling grout pumps power, we have electric motor, diesel engine and air powered for clients option.