Grout pump grouting
Grout pump for grouting is used for tunnel excavation and maintenance, mine engineering, water conservancy and hydropower engineering, slope reinforcement, large Bridges and high-rise building foundation treatment engineering, and the pressure grouting reinforcement of all kinds of underground engineering and so on.
The high-pressure Grout pump for grouting is a kind of construction tool for plugging engineering. What should I pay attention to when using a high-pressure grouting pump? Let’s take a look together!
1. Before using the machine, check whether the screws of each part of the high-pressure pipe fall off, and some words should be tightened.
2. Adjust the speed to the maximum when using the electric drill, and use the wire control switch to control. And it is forbidden to operate the electric drill in the hammer mode.
3. When using a high-pressure grouting pump for grouting, the pressure of the needle should be considered to keep the work safe.
4. When grouting, pay attention to the temperature of the medium at all times. If the temperature of the machine reaches the temperature of the machine, stop working in time and use the special cleaning agent for cleaning quickly.
5. Wear eye protection when working, and avoid spraying the medicament on the eyes.
6. It is forbidden to pour pills into the cup when falling down.
7. After using the grout pump for grouting, immediately use a special cleaning agent to clean the machine for 2 to 3 minutes.
