Electric hydraulic pump for mono strand stress jack

Double acting hollow plunger lifting hydraulic jack can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The double acting hollow plunger lifting hydraulic jack is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof Jacks are safer and last longer.

First, 500 ton single acting hydraulic ram jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 500 ton single acting hydraulic ram jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

As a professional single acting self heavy duty hydraulic jack manufacturer, Leadcrete has produces a variety of series of single acting self heavy duty hydraulic jacks, such as single acting center hole hydraulic jack, thin type single acting hydraulic jack and so on. The single acting self heavy duty hydraulic jack also come in different sizes depending on the stroke, and the capacity of the hydraulic fluid.

750t capacity double acting hydraulic cylinder and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the 750t capacity double acting hydraulic cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Leadcrete Company produces double acting hydraulic lifting jack for pile foundation testing. Double acting hydraulic lifting jack has the characteristics of large output force, light weight and long-distance operation. Double acting hydraulic lifting jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

Small double-acting hydraulic cylinder and electric oil pump for sale to Russia. The tonnage of this hydraulic jack is 250 tons with 200mm stroke. Because our small double-acting hydraulic cylinder parts hydraulic jack own have the following advantages, it is accepted by many different customers.

The type of hot sell long stroke synchronous jack suppliers is a kind of separating type hydraulic cylinder, it is a kind of new style lifting tool. Hot sell long stroke synchronous jack suppliers has compact structure, simple operation, convenient and safe, etc. it is especially used for factory, oil field, shipping, warehouse, railway building, bridge, etc.

If multiple 10000Psi single acting steel lock nut hydraulic plunger cylinder with low price are used to lift the same equipment, the same type of hydraulic jacks should be used, and the sum of the additional lifting weight of each 10000Psi single acting steel lock nut hydraulic plunger cylinder with low price should not be less than 1.5 times the gravity of the equipment.
10000Psi single acting steel lock nut hydraulic plunger cylinder with low price should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

The load return high tonnage lock nut hydraulic lifting cylinder combines with the functions of other jacks. The safety of the load return high tonnage lock nut hydraulic lifting cylinder is suitable for the long-term extension of the piston to support the load. The load return high tonnage lock nut hydraulic lifting cylinder maintains mechanical load for long periods of time. Available in low-profile, lightweight or high-tonnage models with capacities ranging from 20 to 1000 tons and stroke lengths from 45 mm to 300 mm.

In order to guarantee our 200tons hydraulic hollow jack cylinder with hydraulic power pack can be exported to European countries, we apply two CE Certificates for our 200tons hydraulic hollow jack cylinder and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries. If you want to know more 20tons single acting hydraulic hollow jack cylinder information, please contact us!

Hydraulic cylinder and electric hydraulic pump for mono strand stress jack must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the electric hydraulic pump for mono strand stress jack is damaged, deformed, or in need of repair, do not use! When the hydraulic jack cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Large double acting high tonnage hollow hydraulic jack own have the follow advantages, it is accepted by many different customers. Large double acting high tonnage hollow hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

If you are interested in the 700bar double acting long stroke hollow piston hydraulic cylinders price, please let us know the tonnage and stroke you required.
We have many standard model for your option, and we also could customize as per your requirement. If you are interested in our 700bar double acting long stroke hollow piston hydraulic cylinders, electric pump or other hydraulic tool, please contact us!

Leadcrete Company produces 300 ton double acting high tonnage hydraulic cylinder for pile foundation testing. 300 ton double acting high tonnage hydraulic cylinder has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 300 ton double acting high tonnage hydraulic cylinder has been widely used in foundation settlement tests and static piles.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300-ton double hollow jack hydraulic cylinder, electric pump for 30 years. 300 ton double hollow jack hydraulic cylinders are widely used in roads, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Double acting low height hydraulic cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double acting low height hydraulic cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

If multiple single acting lock nut hydraulic lift piston cylinder are used to lift the same equipment, the same type of hydraulic jacks should be used, and the sum of the additional lifting weight of each single acting lock nut hydraulic lift piston cylinder should not be less than 1.5 times the gravity of the equipment.
Single acting lock nut hydraulic lift piston cylinder should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Double-acting large tonnage hydraulic jack cylinder own have the following advantages, it is accepted by many different customers. 700 Bar double acting large tonnage hydraulic jack cylinder is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 400tons stroke 300mm double acting hydraulic jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 400tons stroke 300mm double acting hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of 200t capacity single-acting hydraulic jack, electric pump for 30 years. 20t capacity single-acting hydraulic jacks are widely used in road, railway, bridge, city interchanges, hydropower station dams, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnels and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Leadcrete Company produces double-acting steel press hydraulic cylinders with great prices for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. Double acting steel press hydraulic cylinder with great price is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

The attention of 250 ton double acting solid hydraulic ram jack with pump for sale:
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This 250 ton double acting solid hydraulic ram jack uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

Leadcrete brand high quality single acting steel hydraulic cylinder price and electric oil pump for sale to. The tonnage of this hydraulic jack is 300 tons with 500mm stoke. Because our high quality single acting steel hydraulic cylinder price own have the follow advantages, it is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

10000Psi double acting hydraulic cylinder price is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 10000Psi double acting hydraulic cylinder price is been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on. If you want to know 10000Psi double acting hydraulic cylinder price, welcome to contact!

300 ton double acting electric hydraulic cylinder jack special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. 300 ton double acting electric hydraulic cylinder jack is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

In the word, the YDC series post tension electric stressing mono tension jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension electric stressing mono tension jack prices, pls contact us freely.

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

China double acting hydraulic lift piston hydraulic cylinder used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, China double acting hydraulic lift piston hydraulic cylinder has been widely used in foundation settlement tests and static piles.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of double acting hydraulic jack price, electric pump for 30 years. Double acting hydraulic jack is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, double acting hydraulic jack price have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The carrying capacity of the ultra thin single acting hydraulic oil cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the ultra thin single acting hydraulic oil cylinder jack is suitable. For the convenience of taking out, the minimum height of the ultra thin single acting hydraulic oil cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.