United ipinle (English)
Home » Peristaltic Hose Pump » Ce Iso Durable Industrial Hose Squeeze Pump With Adjustable Flow Rate

Ce Iso Durable Industrial Hose Squeeze Pump With Adjustable Flow Rate

Ce Iso Durable Industrial Hose Squeeze Pump With Adjustable Flow Rate mainly consists of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Rated 4.9/5 based on 209 customer reviews
Share:
Content

Ce Iso Durable Industrial Hose Squeeze Pump With Adjustable Flow Rate can transport medium: strong abrasive medium, high specific gravity medium, corrosive medium, high solid content medium, shear sensitive medium, metering application, high viscosity medium, high maintenance cost application, long fiber medium, self-priming occasion and crystalline medium.

industrial hose pump
industrial hose pump
Application and maintenance of Ce Iso Durable Industrial Hose Squeeze Pump With Adjustable Flow Rate:
(1) Check before starting: whether the connectors and fasteners are firm, pressurize them to working pressure with clear water, and check whether there is any leakage in each system.
(2) Attention should be paid during startup and operation: the voltage is consistent enough, the rotating speed is uniform, and the sound is normal. If the pump is equipped with other power machines, it should be operated according to the requirements of their operating instructions. When the hose pump is idling (vacuumizing or exhausting), the rotating speed of the pump should not exceed 200 rpm. The working pressure shall not exceed the rated working pressure of slurry hose pump.
(3) After use, you must work with clear water for 1-2 minutes, and clean the working cavity and pipeline to avoid damage to the hose caused by residual crystallization of certain liquid.
(4) hose replacement method:
1. Remove the front end cover, and remove the shaft retaining ring on the roller shaft to remove the roller.
2. The inlet and outlet nozzles can be taken out by loosening the stiffening hoop, and the U-shaped hose can be taken out of the pump cavity.
3. The hose installation and replacement can be reversed.
Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Peristaltic Hose Pump