50 100 200 500 ton hydraulic cylinder for sale

In order to guarantee our double acting 250 ton hydraulic jack with hydraulic power pack can be exported to European countries, we apply two CE Certificate for our double acting 250 ton hydraulic jack and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries.

Highly cost effective double acting high tonnage hydraulic cylinder jack for sale can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. So what are the precautions for the use of highly cost effective double acting high tonnage hydraulic cylinder jack for sale?

Leadcrete brand high quality single acting steel hydraulic cylinder price and electric oil pump for sale to. The tonnage of this hydraulic jack is 300 tons with 500mm stoke. Because our high quality single acting steel hydraulic cylinder price own have the follow advantages, it is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

Leadcrete brand 300ton double acting steel custom hydraulic cylinder and electric oil pump own have the following features, promise quality.
300ton double-acting steel custom hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear-resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. It is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

Best price double acting large hydraulic cylinder jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, Best price double acting large hydraulic cylinder jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

First, 150 ton high technical support single acting high tonnage hydraulic jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 150 ton high technical support single acting high tonnage hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

The bridge construction anchor center hole hydraulic cylinder is usually used to the construction of bridge and buildings, railway and subway, water conservancy and hydropower engineering and bridge construction anchor center hole hydraulic cylinder is suitable for the tension of group anchors with 1860-2000 sizes, Φ15.24, Φ12.7 strands.

Double acting hydraulic cylinder for ship synchronous lifting and maintenance should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double acting hydraulic cylinder for ship synchronous lifting and maintenance. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

The carrying capacity of the hydraulic cylinder for synchronous lifting pushing should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic cylinder for synchronous lifting and pushing should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Double-acting steel cylinder hydraulic jacks for traffic engineering are used to support lifting things. Hydraulic jacks are used for bridge reinforcement and other operations. The double-acting steel cylinder hydraulic jack for traffic engineering must be carefully inspected before the operation to ensure that the components are not damaged and the jacking is smooth. Choose a solid and flat place to place the jack to prevent the heavy objects from tilting during the operation.

First, 500 ton single acting hydraulic ram jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 500 ton single acting hydraulic ram jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

Electric prestressing jack for construction and bridge structure is compact, the work is smooth, the oil pressure is high, the tension is large, electric prestressing jack for construction and bridge is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

200 ton hydraulic return double acting high tonnage hydraulic cylinders own have the follow advantages, it is accepted by many different customers. 200 ton hydraulic return double acting high tonnage hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The manufacturer price single acting hydraulic jack cylinder has a very low closing height and is suitable for limited space. Manufacturer price single acting hydraulic jack cylinder is can be used for highway bridge maintenance, ship diesel engine maintenance adjustment, power plant wind power equipment maintenance adjustment and other synchronous lifting instead of rubber bearings.

The load return high tonnage lock nut hydraulic lifting cylinder combines with the functions of other jacks. The safety of the load return high tonnage lock nut hydraulic lifting cylinder is suitable for the long-term extension of the piston to support the load. The load return high tonnage lock nut hydraulic lifting cylinder maintains mechanical load for long periods of time. Available in low-profile, lightweight or high-tonnage models with capacities ranging from 20 to 1000 tons and stroke lengths from 45 mm to 300 mm.

The factory price synchronous hydraulic jack cylinders is mainly used for lifting heavy object. If you tell me your tonnage, stroke, center hole and outer diameter, etc. We can make factory price synchronous hydraulic jack cylinders according to your detail requirement. If you want to know more factory price synchronous hydraulic jack cylinders information,please contact us!

The carrying capacity of the 200Ton single acting low height lock nut hydraulic cylindershould be greater than 1.2 times the gravity of the weight; the minimum height of the 200Ton single acting low height lock nut hydraulic cylinder is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

When used double action hydraulic cylinder for hydraulic press, should strictly abide by the provisions of the main parameters, avoid ultra-overload, or when lifting height or lifting tonnage in excess of the provisions, the tank top of a serious oil spill.
Determine the focus of lifting objects, select the double action hydraulic cylinder for hydraulic press focal point, and must take into account whether the hardness of the ground pad with tough steel, so as to avoid the risk of dumping of produce when lifting.

Double acting hollow plunger lifting hydraulic jack can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The double acting hollow plunger lifting hydraulic jack is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof Jacks are safer and last longer.

When the double acting high tonnage hydraulic piston cylinder is lifnting, it is necessary to select a hydraulic jack suitable for tonnage:
The carrying capacity of the double-acting high tonnage hydraulic piston cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the double-acting high tonnage hydraulic piston cylinder should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

High quality standard heavy industry hydraulic cylinder 300 ton can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.

Leadcrete Company produces hydraulic jacks for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. 500 ton double acting hydraulic cylinder for sale is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500 ton double acting hydraulic cylinder for sale has been widely used in foundation settlement tests and static piles.

100 ton single acting Ultra-thin hydraulic press cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the 100 ton single acting Ultra-thin hydraulic press cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 1000ton double acting steel hydraulic press cylinder jack for railway constructionk, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Double acting high tonnage hydraulic jacks can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.

In the word, the YDC series post tension stressing equipment jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension stressing equipment jack, pls contact us freely.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of hydraulic jack, electric pump for 30 years. 500 ton double acting high tonnage hollow hydraulic jack is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 500 ton double acting high tonnage hollow hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

China factory double acting electric hydraulic jack price and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the China factory double acting electric hydraulic jack reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel. If you want to know more China factory double acting electric hydraulic jack price,please contact us!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 250 ton steel double acting hydraulic cylinders, electric pump for 30 years. 250 ton steel double acting hydraulic cylinders are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.