Double acting hollow hydraulic jack

If multiple 200 ton high efficiency single acting high tonnage lock nut hydraulic jack are used to lift the same equipment, the same type of hydraulic jacks should be used, and the sum of the additional lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment. 200 ton high efficiency single acting high tonnage lock nut hydraulic jack should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Leadcrete brand 500tons stroke 150mm double acting hydraulic jack and electric oil pump own have the following features, promise quality.
500tons stroke 150mm double acting hydraulic jack, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. It is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Best price heavy duty 200 ton hydraulic cylinder for ship engineering has the characteristics of large output force, light weight and long-distance operation. Best price heavy duty 200 ton hydraulic cylinder for ship engineering is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze.

The carrying capacity of the Single acting high tonnage lock nut hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the Single acting high tonnage lock nut hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

100 ton single acting low height lock nut hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 100 ton single acting low height lock nut hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Lead Equipment Co., Ltd is a professional manufacturer of hydraulic cylinder for pulling with power pack in China. We could make kinds of standard and non-standard hydraulic cylinders for pulling with the oil pump.

The carrying capacity of the ultra thin single acting hydraulic oil cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the ultra thin single acting hydraulic oil cylinder jack is suitable. For the convenience of taking out, the minimum height of the ultra thin single acting hydraulic oil cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Leadcrete Company produces 600 ton high technical support double acting high tonnage hydraulic jack . It has the characteristics of large output force, light weight and long-distance operation. 600 ton high technical support double acting high tonnage hydraulic jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

First, 200t capacity single-acting pull hydraulic jack description: The single-acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction, and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 200t capacity single-acting pull hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High-strength alloy steel is durable.

The carrying capacity of the 200Ton single acting low height lock nut hydraulic cylindershould be greater than 1.2 times the gravity of the weight; the minimum height of the 200Ton single acting low height lock nut hydraulic cylinder is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

First, 200t high tonnage single acting standard cylinder hydraulic description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 200t high tonnage single acting standard cylinder hydraulic: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

300ton single acting hollow plunger hydraulic cylinder description: The 300ton single acting hollow plunger hydraulic cylinder with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

High strength double acting high tonnage hydraulic jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more about high strength double acting high tonnage hydraulic jack prices, please contact us!

High tonnage double acting pull hydraulic cylinder produced by Lead Equipment have undergone strict quality control before leaving the factory, so they can display their good performance when they reach the unit. Even so, we still have to spend a section to explain its post-maintenance. Because the high tonnage double acting pull hydraulic cylinder for concrete frame are placed for a long time, the internal parts will produce some minor changes. These changes are what we usually need to pay attention to. Don’t wait until you use it to remember it.

The double acting high pressure big bore hydraulic cylinders should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the double acting high pressure big bore hydraulic cylinders can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the hydraulic jack. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

200 ton hydraulic return double acting high tonnage hydraulic cylinders own have the follow advantages, it is accepted by many different customers. 200 ton hydraulic return double acting high tonnage hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300-ton double hollow jack hydraulic cylinder, electric pump for 30 years. 300 ton double hollow jack hydraulic cylinders are widely used in roads, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Heavy duty hollow hydraulic cylinder for bridge construction can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more heavy duty hollow hydraulic cylinder for bridge construction price, please contact us!

The type of hot sell long stroke synchronous jack suppliers is a kind of separating type hydraulic cylinder, it is a kind of new style lifting tool. Hot sell long stroke synchronous jack suppliers has compact structure, simple operation, convenient and safe, etc. it is especially used for factory, oil field, shipping, warehouse, railway building, bridge, etc.

Product line of single acting low height lock nut hydraulic jack as follow: industrial tools, lock nuts provide reliable mechanical load retention, low friction locking ring for easy rotation, saving time and effort, designed to withstand 10% lateral load and withstand up to 90% of maximum stroke, hardened surface resists lateral loads and periodic wear. The overflow port acts as a stroke limiter to prevent the plunger from bursting, both inside and outside are protected by weather, replaceable bearings enclose the plunger to provide support throughout the stroke; certified lifting lugs and base mounting holes. If you want to know more single acting low height lock nut hydraulic jack information, please contact us!

150 ton hydraulic cylinder jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. 150 ton hydraulic cylinder jack.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of hydraulic jacks, and electric pumps for 30 years. Self-locking single-acting steel hydraulic jacks are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorages, high-rise buildings, slope reinforcement, tunnel and, and our self-locking single-acting steel hydraulic jacks have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

High quality single-acting lifting hydraulic cylinder description: The high quality single-acting lifting hydraulic cylinder with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

Single acting hydraulic jack cylinder description: The single acting hydraulic jack cylinder with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

300 ton double acting electric hydraulic cylinder jack special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. 300 ton double acting electric hydraulic cylinder jack is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

The factory price synchronous hydraulic jack cylinders is mainly used for lifting heavy object. If you tell me your tonnage, stroke, center hole and outer diameter, etc. We can make factory price synchronous hydraulic jack cylinders according to your detail requirement. If you want to know more factory price synchronous hydraulic jack cylinders information,please contact us!

Leadcrete Company produces 350 ton double-acting high-tonnage hydraulic cylinders for pile foundation testing. It has the characteristics of large output force, lightweight and long-distance operation. 350-ton double-acting high-tonnage hydraulic cylinder is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull, and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering, and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a 350-ton double-acting high-tonnage hydraulic cylinder has been widely used in foundation settlement tests and static piles.

700 bar steel double acting 300 ton hydraulic hollow jack combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 700 bar steel double acting 300 ton hydraulic hollow jack has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

Double acting hydraulic cylinder/jack/ram is a power tool. To avoid the possibility of a major injury, read all instructions carefully before using a double-acting hydraulic cylinder/jack/ram, warnings and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!