Hollow plunger hydraulic cylinder

The design of CLL cheap single acting self-locking type hydraulic jack is the perfect combination of hydraulic principle and mechanical principle. Cheap single acting self-locking type hydraulic jack has thread in the whole stroke range of volcano rod. After fully lifting, the self-locking nut can be unscrewed until it is against the cylinder block. Free lock nut and the cylinder is stressed, so that the oil pump can be removed, which is especially suitable for the continuous and test operation of the truss and truss.

The application of 300ton double acting steel hydraulic piston cylinder Made In China:
1. If the oil quantity of the pump body is insufficient, it is necessary to first add working oil (10# oil) to the pump to work.
2, estimated weight, should not be overloaded.
3. Determine the center of gravity of the lifting object and select the point of gravity of the jack. At the same time, it must take into account whether the softness and hardness of the ground are padded with tough wood to avoid the risk of dumping when lifting.
4. After the jack lifts the heavy object, the heavy material should be supported in time with the tough wood. It is forbidden to use the jack as a support. It is forbidden to use several jacks at the same time to avoid the imbalance of load and the danger of dumping.
5. When using, first connect the quick joint of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the cylinder.
6. Please refer to the instruction manual for the electric pump.

50 ton single acting thin hydraulic jack cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 50 ton single acting thin hydraulic jack cylinder price, please contact us!

The carrying capacity of the 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the 200 ton double acting hollow hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 200 ton double acting hollow hydraulic jack is greater than the sum of the ties and the occipital deformation.

The carrying capacity of the hydraulic cylinder for synchronous lifting pushing should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic cylinder for synchronous lifting and pushing should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Double-acting electric hydraulic jack used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a double-acting electric hydraulic jack has been widely used in foundation settlement tests and static piles.

700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

In the word, the YDC series bridge hydraulic jack for concrete post tension ‘ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in our bridge hydraulic jack for concrete post tension , pls contact us freely.

Double-acting high-tonnage hydraulic cylinder is a power tool. To avoid the possibility of a major injury, read all instructions carefully before use, warnings, and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

Low profile horizontal hydraulic piston cylinder own have the follow advantages, low profile horizontal hydraulic piston cylinder is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, low profile horizontal hydraulic piston cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

100 ton single acting Ultra-thin hydraulic press cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the 100 ton single acting Ultra-thin hydraulic press cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

The carrying capacity of the single acting 300 ton low profile hydraulic jack with locking collar should be greater than 1.2 times the gravity of the weight; the minimum height of the single acting 300 ton low profile hydraulic jack with locking collar is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the single acting 100 ton low profile hydraulic jack with locking collar is greater than the sum of the ties and the occipital deformation.

Lead Equipment as a hot sale double acting lifting jack for synchronous lifting pushing supplier, we not only supply hot sale double acting lifting jack for synchronous lifting pushing, but also supply double acting hydraulic cylinder, electric oil pump, hydraulic hand pump and other related hydraulic tool. Because the type hot sale double acting lifting jack for synchronous lifting pushing is not standard, we could accept to customize kinds of different tonnage and stroke lifting hydraulic cylinder.

300 ton double acting steel hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe. If you want to know more 300 ton double acting steel hydraulic cylinders information, please contact us!

Leadcrete brand 300ton self-lock 75mm stroke hydraulic lifting jack and electric oil pump for sale. The tonnage of this hydraulic jack is 00ton self-lock 75mm. Because our double-acting hydraulic jack own have the follow advantages, it is accepted by many different customers. 300ton self-lock 75mm stroke hydraulic lifting jack is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

200 ton hydraulic return double acting high tonnage hydraulic cylinders own have the follow advantages, it is accepted by many different customers. 200 ton hydraulic return double acting high tonnage hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

We have many types of hydrualic jacks: 500 ton spring return long stroke single acting hydraulic ram jack, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–Leadcrete company professional planning to build. Different types of 500 ton spring return long stroke single acting hydraulic ram jack use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

The post tension jack for post tensioning tension equipment are used pre-stress steel wire and bridge pulling. The post tension jack for post tensioning tension equipment need match oil pump use, the power of the tension and the lift is provided by the high pressure oil at the tension pump.

Double acting 250 ton hydraulic cylinder price, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double acting 250 ton hydraulic cylinder.

The 600-ton double-acting hollow plunger hydraulic lifting cylinder can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes, and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The 600-ton double-acting hollow plunger hydraulic lifting cylinder is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof jacks are safer and last longer.

Lead Company produces large tonnage 500 ton double acting hydraulic jack for pile foundation testing.Large tonnage 500 ton double acting hydraulic jack has the characteristics of large output force, light weight and long-distance operation. Large tonnage 500 ton double acting hydraulic jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze.

Leadcrete brand high quality 250 ton double acting hydraulic jack and electric oil pump for sale to Russian. The tonnage of this high quality 250 ton double acting hydraulic jack is 250 tons with 500mm stoke. If you want to know more high quality 250 ton double acting hydraulic jackinformation, please contact us!

500 bar 200T long stroke double-acting construction hydraulic cylinder is also a double-acting hydraulic jack, which is also a separate hydraulic jack. Unlike the single-acting hydraulic jack, it relies on the double-acting hydraulic pump station to provide power. In general, 500 bar 200T long stroke double acting construction hydraulic cylinder is large. Tonnage, large stroke hydraulic jack, double-acting hydraulic jack load tonnage is basically between 100T-1000T, can be made into various types of hydraulic jacks according to customer needs.

Double-acting high tonnage pull hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, double-acting high tonnage pull hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double-acting hydraulic cylinder and electric oil pump for sale to Russia. The tonnage of this hydraulic jack is 200 tons with a 200mm stroke. If you want to know more double-acting hydraulic cylinder information, please contact us!

Wholesale low price double acting hydraulic jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, if you want to know wholesale low price double acting hydraulic jack price, welcome to contact!

First, 100 ton single acting hydraulic mini lifting jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 100 ton single acting hydraulic mini lifting jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

First, 150 ton high technical support single acting high tonnage hydraulic jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 150 ton high technical support single acting high tonnage hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

The carrying capacity of the Single acting high tonnage lock nut hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the Single acting high tonnage lock nut hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of hydraulic jack, electric pump for 30 years. 1000ton double acting steel hydraulic cylinder bench made in China are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 1000ton double acting steel hydraulic cylinder bench made in China have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.