200 ton Single Acting Lockable Hydraulic Ram

300 ton double acting electric hydraulic cylinder jack special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. 300 ton double acting electric hydraulic cylinder jack is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

Factory price hydraulic tensioning prestressed jack is our YDC6500 post tension hollow hydraulic jack, it is customized our customer from US. Tonnage is 650 tons, stroke is 200mm, closed height is 410mm, outer diameter is 557mm. Factory price hydraulic tensioning prestressed jack is more convenient, light and new design jack. It has compact structure, perfect seal performance, light weight, small dimension and many other features. The factory price hydraulic tensioning prestressed jack is used for stressing 27 pc strands, and it need to equip a 60Mpa 4L/min electric oil pump.

500 bar 200T long stroke double-acting construction hydraulic cylinder is also a double-acting hydraulic jack, which is also a separate hydraulic jack. Unlike the single-acting hydraulic jack, it relies on the double-acting hydraulic pump station to provide power. In general, 500 bar 200T long stroke double acting construction hydraulic cylinder is large. Tonnage, large stroke hydraulic jack, double-acting hydraulic jack load tonnage is basically between 100T-1000T, can be made into various types of hydraulic jacks according to customer needs.

Double acting 250 ton hydraulic cylinder price, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double acting 250 ton hydraulic cylinder.

The characteristics 200-ton single-acting steel hollow plunger 700 Bar hydraulic jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High-strength alloy steel is durable.

When used double action hydraulic cylinder for hydraulic press, should strictly abide by the provisions of the main parameters, avoid ultra-overload, or when lifting height or lifting tonnage in excess of the provisions, the tank top of a serious oil spill.
Determine the focus of lifting objects, select the double action hydraulic cylinder for hydraulic press focal point, and must take into account whether the hardness of the ground pad with tough steel, so as to avoid the risk of dumping of produce when lifting.

We have many types of hydrualic jacks: single acting ultra high pressure ultra thin hydraulic cylinder jack, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–gaodetec company professional planning to build. Different types of hydraulic jack use methods and operating precautions are not the same, single acting ultra high pressure ultra thin hydraulic cylinder jack, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of double acting high tonnage 300 tons hydraulic ram jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our double acting high tonnage 300 tons hydraulic ram jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

We have many types of double acting piston hydraulic lifting jack for synchronous lifting pushing: thin jacks, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–lead company professional planning to build. Different types of double acting piston hydraulic lifting jack for synchronous lifting pushing use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

Our post tension mono jack for railway jacking system should be equipped a YBZ2-2-50A electric power pack. YBZ series of power pack is a kind of plunger electric high pressure power pack, its rated pressure is 50Mpa, the power is 3kw. Its main function is supply power for hydraulic jack, button heading machine, hydraulic extruder, embossing machine and other hydraulic device.

Leadcrete Company produces hydraulic jacks for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. 500 ton double acting hydraulic cylinder for sale is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500 ton double acting hydraulic cylinder for sale has been widely used in foundation settlement tests and static piles.

200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

In order to guarantee our 200tons hydraulic hollow jack cylinder with hydraulic power pack can be exported to European countries, we apply two CE Certificates for our 200tons hydraulic hollow jack cylinder and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries. If you want to know more 20tons single acting hydraulic hollow jack cylinder information, please contact us!

The carrying capacity of the 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the 200 ton double acting hollow hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 200 ton double acting hollow hydraulic jack is greater than the sum of the ties and the occipital deformation.

We have many types of Double acting hydraulic lifting jacks. Lead company professional planning to build. Different types of Double acting hydraulic lifting jack use methods and operating precautions are not the same. If you want to know more Double acting hydraulic lifting jack information, please contact us!

The carrying capacity of the Single acting high tonnage lock nut hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the Single acting high tonnage lock nut hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

If multiple 200 ton high efficiency single acting high tonnage lock nut hydraulic jack are used to lift the same equipment, the same type of hydraulic jacks should be used, and the sum of the additional lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment. 200 ton high efficiency single acting high tonnage lock nut hydraulic jack should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 250 ton steel double acting hydraulic cylinders, electric pump for 30 years. 250 ton steel double acting hydraulic cylinders are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Leadcrete Company produces single acting pulling hydraulic ram cylinder for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. Single acting pulling hydraulic ram cylinder is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

10000Psi double acting hydraulic cylinder price is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 10000Psi double acting hydraulic cylinder price is been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on. If you want to know 10000Psi double acting hydraulic cylinder price, welcome to contact!

Best price heavy duty 200 ton hydraulic cylinder for ship engineering has the characteristics of large output force, light weight and long-distance operation. Best price heavy duty 200 ton hydraulic cylinder for ship engineering is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze.

50 ton single acting thin hydraulic jack cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 50 ton single acting thin hydraulic jack cylinder price, please contact us!

The factory price synchronous hydraulic jack cylinders is mainly used for lifting heavy object. If you tell me your tonnage, stroke, center hole and outer diameter, etc. We can make factory price synchronous hydraulic jack cylinders according to your detail requirement. If you want to know more factory price synchronous hydraulic jack cylinders information,please contact us!

Leadcrete Company produces 500 ton double acting hydraulic jack for pile load test. It has the characteristics of large output force, light weight and long-distance operation. 500 ton double acting hydraulic jack for pile load test is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500 ton double acting hydraulic jack for pile load test has been widely used in foundation settlement tests and static piles.

Lead Equipment Co., Ltd is a professional manufacturer of double-acting push-pull hydraulic cylinders with power packs in China. We could make kinds of standard and non-standard hydraulic jacks with oil pumps. The following is our double acting push pull hydraulic cylinder with a power pack, they are sent to Greece. If you want to know more double-acting push-pull hydraulic cylinder information, please contact us!

The electric post tension hydraulic jack is mainly used for the overall pulling force of the group anchor. The jack is easy to operate, reliable and saves steel strands than other types of jacks. Electric post tension hydraulic jack is mainly used for bridge construction and other projects that use products such as anchor bolts and tensile equipment. Electric post tension hydraulic jack is composed of protective sleeve, end cover plug, connecting sleeve, bracing sleeve, rebound spring and dynamic and static sealing rings. The hydraulic jack has the function of tensioning and anchoring.

Leadcrete brand 500tons stroke 150mm double acting hydraulic jack and electric oil pump own have the following features, promise quality.
500tons stroke 150mm double acting hydraulic jack, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. It is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

When the 700-ton hydraulic ram is lifting, it is necessary to select a hydraulic jack suitable for tonnage:
The carrying capacity of the 700-ton hydraulic ram should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700-ton hydraulic ram should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 400tons stroke 300mm double acting hydraulic jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 400tons stroke 300mm double acting hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The carrying capacity of the ultra thin single acting hydraulic oil cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the ultra thin single acting hydraulic oil cylinder jack is suitable. For the convenience of taking out, the minimum height of the ultra thin single acting hydraulic oil cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.